About Me
I CT For
Showing posts with label CT SCRAP-A-LICIOUS. Show all posts
Showing posts with label CT SCRAP-A-LICIOUS. Show all posts
Sunday, December 30, 2012
Goodbye 2012
(Click to view full-size)
This tutorial was written by me on December 30th, 2012 and is my own creation. Any resemblance to any other tutorial is purely coincidental and unintentional.
PSP Version used: PSP9, but should work in other versions.
This tutorial assumes you have a good working knowledge of PSP.
Supplies:
Tube of choice. I am using the work of Zebrush, a PTU artist. You can purchase her tubes at PicsForDesign.
PTU kit Glamorous New Year by Purple's Kreationz. You can purchase this kit @ Scrap-A-Licious.
New Year's Template 4 by Amy & Leah's Gimptastic Tuts. You can find it here.
Mask 41 by Rosesblack Creative. You can find it here.
Font of choice. I am using Callie Hand.
Filters: Penta.com Color Dot
--------------------
Open your template. Delete the following layers: Credits, 1, 11, 12. Set the canvas size to 700 x 450.
Open your mask & minimize.
Add a new raster layer and move this layer to the bottom. Set your foreground to #3f3f3f and your background to #b5b6b6. Create a linear gradient with these two colors, angle 45, repeats 3. Floodfill your raster layer with this gradient. Apply your mask, merge group.
Open PK-GNY-E8. Resize by 60%, sharpen. Copy and paste as a new layer above the mask layer. Place to the left side. Duplicate and mirror. Merge these two layers together.
Move layer 8 below layer 9. Merge layers 8 and 10 together. Select all, float, defloat. Open PK-GNY-P4. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original merged layer.
On layer 9, select all, float, defloat. Open PK-GNY-P9. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original layer. Repeat for layers 7 and 4.
On layer 6, Penta.com Color Dot. Change the distance to 10. Open your tube. Copy and paste as a new layer and place over layer 6, on the far right. Duplicate and mirror. Resize this tube by 80%. Place so she's behind the frame on the left. Merge these two tube layers together. On layer 6, select all, float, defloat. On the merged tube layer, selections, invert and press delete. Deselect.
On the merged tube layer, adjust, hue and saturation, colorize 0, 0. Duplicate the merged tube layer, gaussian blur 3.00. Set the blend mode to screen, opacity 38. On the original merged tube layer, set the opacity to 20.
On layer 5, manual color correction. Set the source color to #725706 and the target color to #ffffff.
Merge layers 2 and 3 together. Select all, float, defloat, expand by 5. Add a new raster layer. Open PK-GNY-P3. Copy and paste as a new layer. Selections, invert and press delete. Move this layer below the merged circle layer.
Set your foreground to #ffffff and your background to #b5b6b6. Create a new gradient with these two colors using the same settings as before. On the merged circle layer, select all, float, defloat. Add a new raster layer and floodfill with your gradient. Deselect.
Open your tube again, resizing as necessary. Copy and paste as a new layer and place over the upper right circle. Duplicate and mirror and place over the lower left circle. Merge these two layers together. On the merged circle layer, select all, float, defloat. On the merged tubes layer, selections, invert and press delete. Deselect.
Duplicate the merged tube layer you just added, gaussian blur using the same settings as before. Set the blend mode to screen, opacity 94. On the original tube layer, set the opacity to 80.
Open PK-GNY-E26. Copy and paste as a new layer.
Copy and paste your tube again, resizing as necessary. Place to your liking.
Open PK-GNY-E37. Copy and paste as a new layer. Place to the bottom of your tube.
Open PK-GNY-E20. Resize by 50%. Copy and paste as a new layer. Place to the left side. Rotate slightly to the left.
Open PK-GNY-E30. Resize by 61%. Copy and paste as a new layer and place next to the heart lolli. Rotate slightly to the right. See my tag for reference.
Open PK-GNY-E6. Resize by 50%. Copy and paste as a new layer. Place slightly down from the two lollis. See my tag for reference.
On the words 2 layer, select all, float, defloat. Open PK-GNY-P2. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original layer.
Merge together the words 2 layers & also merge together the words 1 layers. Now merge together both wordart layers. Place the wordart to the bottom of your tube.
Open PK-GNY-E29. Resize by 60%. Copy and paste as a new layer. Place to the far right.
Open PK-GNY-E19. Resize by 50%. Copy and paste as a new layer. Place slightly down and to the left of the bottle.
Open PK-GNY-E40. Resize by 60%. Copy and paste as a new layer. Place to the upper right.
Open PK-GNY-E21. Resize by 50%. Copy and paste as a new layer. Place to the lower left, slightly down from the car.
Add your name, copyright, and license info. Apply a drop shadow of choice, merge visible. Resize by 86% (optional).
Thanks for checking out my tutorials.
Saturday, December 22, 2012
Cheers
This tutorial was written by me on December 22nd, 2012 and is my own creation. Any resemblance to any other tutorial is purely coincidental and unintentional.
PSP Version used: PSP9, but should work in other versions.
This tutorial assumes you have a good working knowledge of PSP.
Supplies:
Tube of choice. I am using the amazing work of Alex Prihodko. You must purchase his
work and acquire a license to use his art. You can find his work here.
PTU Cheers kit by Manipulate by Magik. You can purchase this kit here.
Collab template 01MPMcollabwPixie from Millie's PSP Madness. You can find it here.
Font of choice. I am using Stephanie Marie JF.
--------------------
Open your template. Set the canvas size to 650 x 650. Resize all layers by 92%. Delete the copyright layer, layers 12, 11, 10, 9, and 1.
Open the glitter. Copy and paste as a new layer above all other layers. Place to the upper right corner. Duplicate, mirror, and merge down. Duplicate again, flip, and merge down. Move this layer to the bottom.
Merge together layers 2 and 3. Select all, float, defloat. Open paper 14. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original layer.
On layer 4, select all, float, defloat. Open paper 19. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original layer.
Merge together layers 5 and 6. Select all, float, defloat. Open paper 3. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original layer.
Open the confetti. Copy and paste as a new layer. Place to the upper right corner. Duplicate, mirror, and flip. Merge down.
On layer 7, select all, float, defloat. Open paper 1. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original layer.
On layer 8, select all, float, defloat. Add a new raster layer and floodfill with #000000. Deleselect and delete the original layer.
Open your tube and resize as necessary. Copy and paste as a new layer and place over the furthest right black rectangle. Duplicate your tube 3 more times. Click on the eye in the layer palette for the 3 duplicate tube layers to hide them for now.
For the first tube layer: On the black rectangles layer, use your magic wand and click inside the furthest right rectangle. On the tube over that rectangle, selections, invert and press delete. Deselect. Don't worry about the jagged edges, we will fix that in a bit.
Unhide the first duplicate tube layer. Repeat the above for the rest of the black rectangle layers & tube layers. When done, merge your tube layers together. On the black rectangles layer, select all, float, defloat. On the tubes layer, selections, invert and press delete. You should no longer have the jagged edges.
Duplicate the merged tubes layer. Gaussian blur, 3.00. Set the blend mode to screen, opacity 54. On the original merged tubes layer, set the blend mode to luminance (L), opacity 44.
Open the cell. Resize by 60%. Copy and paste as a new layer. Place to the bottom right. Rotate slightly to the left.
Open the balloons. Resize by 80%. Copy and paste as a new layer. Place to the top, slightly to the left of center. See my tag for reference.
Open the bow. Resize by 40%. Copy and paste as a new layer. Place over the bottom of the balloons. See my tag for reference.
Open the bubbles. Copy and paste as a new layer.
Open the note. Resize by 60% and sharpen. Copy and paste as a new layer. Place to the top, slightly to the right of center.
Open your tube again, resizing as necessary. Copy and paste as a new layer.
Open the garland. Copy and paste as a new layer. Place to the bottom of your tag.
Open flower 3. Resize by 50%. Copy and paste as a new layer. Place to the bottom over the garland, slightly off center to the left. Duplicate and mirror. See my tag for reference.
Open flower 2. Resize by 40%. Copy and paste as a new layer. Place between the two black flowers.
Open the cupcake. Resize by 50%. Copy and paste as a new layer. Place to the lower left, covering part of the left side of the left black flower.
Open the brad. Resize by 30%. Copy and paste as a new layer. Place to the upper right corner of the black rectangles layer. Rotate slightly to the right and sharpen. Duplicate and place to the lower left corner of the rectangles layer, but rotate in the other direction. See my tag for reference.
Open chamagne 2. Resize by 75%. Copy and paste as a new layer. Place down and slightly to the right of the cell.
Open the champagne flutes. Resize by 60%. Copy and paste as a new layer. Place slightly to the left of the champagne bottle.
Add your name, copyright, and license info. Apply a drop shadow of choice and merge visible. Save as a PNG.
Thanks for checking out my tutorials.
Monday, November 26, 2012
Candy Christmas Tag Set
CANDY CHRISTMAS
Thanks to Designs by LK for an amazing kit to work with, Candy Land!
I decided to create a tag set. Please do not alter these in any ways and do not change the filenames. Click on the image to view the full size. Thanks!
Sunday, November 4, 2012
Bootilicious Emo
This tutorial was written by me on November 4th, 2012 and is my own creation. Any resemblance to any other tutorial is purely coincidental and unintentional.
PSP Version used: PSP9, but should work in other versions.
This tutorial assumes you have a good working knowledge of PSP.
Supplies:
Tube by VeryMany. You must purchase her work and obtain the proper licensing. You can do so here.
Kit is PTU Bootilicious Emo by Denise Creations. You can purchase it here.
0mask026 LT, which you can find here. If this is your mask, please let me know so I can credit you correctly.
Font of choice. I am using Over the Rainbow.
Filters: Penta.com Colour Dot
--------------------
Open Ele65. Set the canvas size to 600 x 600. Resize your frame layer, all layers unchecked, by 80%.
Open Paper2 and your mask. Copy and paste your paper as a new layer. Move this below your frame layer. Apply your mask, merge group.
On the frame layer, use your magic wand and click inside the frame. Selections, modify, expand by 10. Add a new raster layer and floodfill with black or you may use a paper of your choice for this layer. Selections, invert and press delete. Deselect and move this layer below your frame layer.
Open your tube. Copy and paste as a new layer. Place to the far left of the inner frame. Duplicate, mirror, and move slighty up. See my tag for reference. Merge these two layers together. Duplicate, gaussian blur 3.00. Set the blend mode to screen, opacity 60. On the original tube layer, adjust, hue & saturation, colorize 0, 0.
Penta Colour Dot. Change the value to 100 and the distance to 10.
Open Ele8. Resize by 60%. Copy and paste as a new layer above your frame layer. Place to the lower right.
Open Ele53. Copy and paste as a new layer. Place along the bottom of the frame.
Open Ele52. Resize by 60%. Copy and paste as a new layer. Place to the lower right corner.
Open Ele25. Copy and paste as a new layer. Place to the upper left corner of your frame.
Open Ele6. Resize by 60%. Copy and paste as a new layer. Place to the bottom left.
Open Ele9. Resize by 40%. Copy and paste as a new layer. Place to the bottom of the shoe.
Open Ele12. Resize by 40%. Copy and paste as a new layer. Place to the lower right corner.
Open Ele19. Resize by 50%. Copy and paste as a new layer. Place to the upper right corner of your frame. Rotate slightly to the right.
Open your tube and resize as necessary. Copy and paste as a new layer and place to your liking.
Add your name, copyright, and license info. Apply a drop shadow of choice and merge visible. Save as a PNG.
Thanks for checking out my tutorials.
Sunday, October 14, 2012
Sweet As Candy II
This tutorial was written by me on October 14th, 2012 and is my own creation. Any resemblance to any other tutorial is purely coincidental and unintentional.
PSP Version used: PSP9, but should work in other versions.
This tutorial assumes you have a good working knowledge of PSP.
Supplies:
Tube of choice. I am using the work of SkyScraps. You can purchase her work here.
PTU Skull Candy by Manipulated by Magik. You can purchase this kit here.
Template005 by Manipulated by Magik. This template is included with the kit.
Font of choice. I am using Stephanie Marie JF.
Filters: Eye Candy 4000 Gradient Glow
--------------------
Open your template. Delete the credits layer and rec. strip layer.
Set your canvas size to 850 x 850. Resize all layers by 71%.
Open glitter spil 2. Copy and paste as a new layer. Place to the upper right corner. Duplicate, mirror, and flip. Move slightly down. Merge these two layers together. Move this layer just above the background layer. You can delete the background layer now.
On the diamond lines layer, manual color correction. Set the source color to #bf2d9c and your target color to #561464.
Merge the top right circle and bottom left circle layers together. Select all, float, defloat. Open paper 23. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original layer.
Open your tube. Copy and paste as a new layer. Place over the upper right circle. Duplicate and move over the bottom left circle. Arrange your tubes to your liking and merge the tube layers together. On the circles layer, select all, float, defloat. On the merged tubes layer, selections, invert and press delete. Deselect. Duplicate your tubes layer. Gaussian blur 3.00, set the blend mode to screen, opacity 50. On the original tubes layer, set the blend mode to luminance (L), opacity 34.
On the right rectangle layer, select all, float, defloat. Open paper 26. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original layer.
On the left rectangle layer, select all, float, defloat. Open paper 14. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original layer.
Merge the left and right oblong layers together. Select all, float, defloat. Open paper 2. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original layer.
On the oval layer, select all, float, defloat. Open paper 7. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original layer.
Create a linear gradient using #eeddf7 and #561464, angle 45, repeats 3.
On the oval frame layer, select all, float, defloat. Add a new raster layer and floodfill with your gradient. Deselect and delete the original layer. Add noise, gaussian 100, monochrome checked.
On the banner layer, select all, float, defloat. Add a new raster layer and floodfill with the gradient you created for the frame layer. Deselect and delete the original layer.
Open your tube again. Copy and paste as a new layer over the banner. Duplicate twice and arrange the tubes to your liking. When satisfied, merge your tubes together. On the banner layer, select all, float, defloat. On the merged tubes layer, selections, invert and press delete. Deselect. Duplicate your tubes layer, gaussian blur 3.00. Set the blend mode to screen, opacity 50. On the original tubes layer, set the blend mode to luminance (L), opacity 34.
Open bow 1. Resize by 90%. Copy and paste as a new layer. Place to the upper right side of the template.
Open the barbed wire. Resize by 85%. Copy and paste as a new layer. Place so it sits on top of oblong shape. See my tag for reference.
Open flower 2. Resize by 60%. Copy and paste as a new layer. Place to the right side, just above the bow on the ribbon. Duplicate and mirror. Place the the upper left corner of your template. See my tag for reference.
Open word art 2. Resize by 90%. Copy and paste as a new layer. Place over the barbed wire.
Eye Candy Gradient Glow. Under the basic tab, change the glow width to 3.00. Under the color tab, select the Fat preset.
Open the equalizer. Resize by 47%. Copy and paste as a new layer. Place to the lower left.
Open the earbuds, mirror. Copy and paste as a new layer. Place over the equalizer.
Open your tube and resize your tube if necessary. Copy and paste as a new layer. Place so she sits on the bottom dotted square. See my tag for reference.
Open lips 2. Resize by 50%. Copy and paste as a new layer. Rotate slightly to the left. Place to the left side of your tag.
Open cupcake 2. Resize by 55%. Copy and paste as a new layer. Place to the bottom right corner.
Open the cat & skull. Resize by 55%. Copy and paste as a new layer. Place to the right of the cupcake.
Open the sparkles. Resize by 85%. Copy and paste as a new layer. Place to your liking. (I rotated mine to be at an angle.)
Add your name, copyright, and license info. Apply a drop shadow of choice.
Merge visible and save as a PNG.
Thanks for checking out my tutorials.
Wednesday, October 3, 2012
The Spooking Hour
This tutorial was written by me on October 4th, 2012 and is my own creation. Any resemblance to any other tutorial is purely coincidental and unintentional.
PSP Version used: PSP9, but should work in other versions.
This tutorial assumes you have a good working knowledge of PSP.
Supplies:
Tube of choice. I am using the work of Alex Prihodko. You can find his tubes here.
PTU Spook It kit by Sinister Creations. You can purchase this kit here.
Template 68 by Millie's PSP Madness. You can find it here.
VixMask Halloween0901 by VixPSP. You can find it here.
Font of choice. I am using Zombified.
Filters: Eye Candy 4000 Gradient Glow
--------------------
Open your template and mask. Minimize your mask for now.
On your template, delete the credit layer. Set the canvas size to 750 x 750. Resize all layers by 80%.
In the materials palette, set your foreground to #8a0202 and your background to #ff7e00. Click on your foreground and select the gradient tab. Select the Foreground-background gradient, angle 45, repeats 3, invert checked, style linear. On your background layer, floodfill with your gradient. Now apply your mask, merge group. Add noise, gaussian, 100, monochrome checked.
Merge together layers 1 and 2. Select all, float, defloat. Open paper 1. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original layer.
On layer 3, select all, float, defloat. Open paper 2. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original layer. Repeat for layer 7.
On layer 4, add noise using the same settings as before.
Merge together laysers 5 and 6. Select all, float, defloat. Open paper 3. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original layer.
On layer 8, select all, float, defloat. Open paper 7. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original layer.
Merge together layers 9 and 10. Manual color correction. Set the source to #c0c0c0 and the target to #ffffff.
Merge together layers 11 and 12.
Open your tube and resize as needed. Copy and paste your tube over the black square on the left side. Duplicate and mirror. Place to your liking and merge the tubes together. On the black square layers, select all, float, defloat. On your tube layer, selections, invert and press delete. Deselect. Duplicate the tube layer again, gaussian blur 3.00. Set the blend mode to screen, opacity 78. On the original layer, set the blend mode to luminance (L), opacity 60.
On the black square layer again, select all, float, defloat. Selections, modify, set selection borders, both sides checked, border width 3, anti-alias checked. Add a new raster layer above your tube layers and floodfill with black. Add noise with the same settings as before.
Open the spider web. Resize by 20%. Copy and paste as a new layer. Place to the right side of your canvas.
Open banner halloween 2. Resize by 25%. Copy and paste as a new layer. Place to the top of your template layers.
Open the cane. Resize by 90%. Copy and paste as a new layer. Move slightly to the right. Duplicate and mirror. Move this layer so the cane is over the other one. See my tag for reference.
Open your tube again and resize as necessary. Copy and paste as a new layer. Move so the bottom edge meets the bottom edge of your template layers.
Open the barbed wire. Resize by 40%. Copy and paste as a new layer. Place to the bottom.
Open the creepy zombie coffin. Resize by 55%, mirror. Copy and paste as a new layer. Place to the bottom right corner.
Open the blood dripping lips. Resize by 50%. Copy and paste as a new layer. Place to the upper left corner. Rotate slightly to the left.
On the wordart layer, Eye Candy 4000 Gradient Glow. Under the basic tab, set the glow width to 3.00. Under the color tab, select the fat preset.
Open the eye candle. Resize by 25%. Copy and paste as a new layer. Place to the bottom left of the coffin.
Open the poison bottle. Resize by 60%. Copy and paste as a new layer. Place to the bottom left corner.
Open the cup cake spider. Resize by 25%. Copy and paste as a new layer. Place down and to the right of the poison bottle.
Add your name, copyright and license info.
Add a drop shadow of choice and then merge visible. Save as a PNG.
Thanks for checking out my tutorials.
Saturday, September 22, 2012
Glorious Autumn
This tutorial was written by me on September 22nd, 2012 and is my own creation. Any resemblance to any other tutorial is purely coincidental and unintentional.
PSP Version used: PSP9, but should work in other versions.
This tutorial assumes you have a good working knowledge of PSP.
Supplies:
Tube of choice. I am using the work of Ismael Rac. You can purchase his work here.
PTU Glorious Autumn kit by Scraps Dimensions. You can purchase it here.
Mask 220 by Weescotslass Creations. You can find it here.
Font of choice. I am using Over the Rainbow.
--------------------
Open element 23. Resize by 75%.
Activate the freehand selection tool. Set it to point to point, add (shift), feather 0, smoothing 0, anti-alias unchecked. Click along the frame to create a selection for the background of the frame.
Open paper 8. Copy and paste as a new layer. Selections, invert and press delete. Deselect and move this layer below the frame layer.
Open your mask and paper 12. Copy and paste paper 12 as a new layer. Apply your mask, merge group. Move this layer to the bottom layer.
Open element 40. Resize by 30%. Copy and paste as a new layer above the frame layer. Move to the left side of the frame, slightly down. Duplicate and move to the right, slightly down. Duplicate and mirror. See my tag for placement.
Open your tube. Copy and paste as a new layer, resize if necessary. Move to the left side of your canvas.
Open element 2. Resize by 40%. Copy and paste as a new layer. Place to the lower left corner.
Open element 15. Resize by 69%. Copy and paste as a new layer. Move slightly up.
Open element 19. Resize by 69%. Copy and paste as a new layer. Place to the right side.
Open element 38. Resize by 25%. Copy and paste as a new layer. Place to the bottom right corner, slightly up.
Open element 54. Resize by 50%. Copy and paste as a new layer. Place to the bottom, to the right of the gourd cluster.
Open element 25. Resize by 25%, mirror. Copy and paste as a new layer and place so it is sitting on the 'A' of the wordart.
Apply a drop shadow of choice.
Add your name, copyright, and license info.
Merge visible and save as a PNG.
Tuesday, September 18, 2012
Black & White
This tutorial was written by me on September 17th, 2012 and is my own creation.
Any resemblance to any other tutorial is purely coincidental and unintentional.
PSP Version used: PSP9, but should work in other versions.
This tutorial assumes you have a good working knowledge of PSP.
Supplies:
Tube of choice. I am using the work of Jose Cano. I purchased this tube when he was at PSP Tubes Emporium, which is now closed. You may purchase his tubes here.
PTU kit Checkered Girl by Purple's Kreationz. You can find the kit here.
Template hotnsexythree by LadyT of Creative Misfits. You can download it here.
Mask 10 by Scraps of Enchantment. You can find it here.
Font of choice. I am using Fucking Tag Font.
Filter: Mura Meister Copies
--------------------
Open your template. Delete the credits layer and the wordart layers. Set the canvas size to 600 x 600.
Open your mask and paper 12. Copy and paste your paper as a new layer just above Raster 1. Crop your mask to 485 x 485. Apply your mask, merge group.
Merge the lefthalfcircle and righthalfcircle layers together. Select all, float, defloat.
Open paper 8. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original layer.
Open your tube. Copy and paste as a new layer. Place over the rightrectangle layer. Mura Meister Copies, Glob preset with the default settings. On the right rectangle layer, select all, float, defloat. On the tube layer, selections, invert and press delete. Deselect. Duplicate, guassian blur 3.00. Set the blend mode to screen, opacity 80. Hue and saturation, colorize, 0, 0. On the original tube layer, set the blend mode to luminance (L), opacity 80. Repeat for the other 2 rectangle layers.
Open the BLADE. Resize by 50%. Copy and paste as a new layer above all the other layer. Rotate slightly to the left and place in the lower right corner.
Open the RIBBONFLOWER. Resize by 80%. Copy and paste as a new layer. Place in the lower right corner, slightly to the left of the razor. Duplicate and place between the first and second rectangle towards the top. See my tag for reference.
Open the CANDLE. Resize by 80%. Copy and paste as a new layer. Place over the razor.
Open the BUTTERSKULL. Resize by 50%. Copy and paste as a new layer. Place towards the top, between the second and third rectangles. Rotate slightly to the left. See my tag for reference.
Open your tube again. Copy and paste as a new layer. Duplicate, gaussian blur with the same settings as before. Set the blend mode to screen. On the original tube layer, colorize with the same settings as before.
Open the MARTINI. Resize by 80%. Copy and paste as a new layer. Place to the lower left corner. Move it slightly up.
Open the LIPS. Resize by 40%. Copy and paste as a new layer. Place over the middle left of rectangle 3, rotate slightly to the right. See my tag for reference.
Open the CUPPY. Resize by 65%, mirror. Copy and paste as a new layer. Place to the bottom left of the martini.
Open the HEART. Resize by 60%. Copy and paste as a new layer. Place to the right of the cuppy. Rotate slightly to the left.
Open RIBBON1. Copy and paste as a new layer. Place to the bottom.
Add your name, copyright, and license info. Apply a drop shadow of choice.
Merge visible and save as a PNG.
Thanks for checking out my tutorials.
Friday, September 14, 2012
Vixen
This tutorial was written by me on September 14th, 2012 and is my own creation. Any resemblance to any other tutorial is purely coincidental and unintentional.
PSP Version used: PSP9, but should work in other versions.
This tutorial assumes you have a good working knowledge of PSP.
Supplies:
Tube of choice. I am using the work of Keith Garvey. You can purchase his tubes here.
PTU Sweet Vixen kit by Scraps Dimensions. You can purchase it here.
Temp 67 by Amy & Leah's Gimptastic Tuts. You can find it here.
M3 by me. You can find the mask here.
Font of choice. I am using Eight Fifteen.
--------------------
Open your template. Delete the copyright layer and the stars layers. Set the canvas to 700 x 700. Resize all layers by 86%.
Open your mask and minimize. Set your foreground to #fdfafe and your background to #e7c252. Create a linear gradient with these colors, angle 45, repeats 3. Unhide the background layer and floodfill with your gradient. Apply your mask, merge group.
Duplicate your mask layer and mirror.
Merge the square 2 and square 3 layers together. Select all, float, defloat. Open paper 3. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original layer.
Merge the circle 2 and circle 3 layers together. Select all, float, defloat. Open paper 9. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original layer.
On the circle 1 layer, select all, float, defloat. Open paper 5. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original layer.
On the square 1 layer, select all, float, defloat. Open paper 11. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original layer.
Open your tube or a closeup. Copy and paste as a new layer and place to your liking.
On the frame layer, use your magic wand and click inside the frame. Selections, modify, expand by 3. On the tube layer, selection, invert and press delete. Deselect.
Duplicate your tube. Gaussian blur 3.00. Set the blend mode to screen, opacity 66. On the original tube layer, set the blend mode to luminance (L), opacity 66.
Set your foreground to #f436fe and your background to #542564. Create a linear gradient with the same settings as before.
On your frame layer, select all, float, defloat. Add a new raster layer and floodfill with your gradient. Deselect. Add noise, gaussian, 50.
Merge the rect 1 and rect 2 layers together. Select all, float, defloat. Open paper 12. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original layer.
Open element 68. Image, rotate, rotate clockwise 90. Copy and paste as a new layer. Place to the bottom of the template. Duplicate and flip.
Open element 15. Resize by 40%. Copy and paste as a new layer. Place to the bottom left. Duplicate and mirror.
Open element 82. Resize by 70%. Copy and paste as a new layer. Place to the bottom of the feathers.
Open element 2. Resize by 20%. Copy and paste as a new layer. Place towards the lower left corner of the rectangle on the left side. See my tag for reference.
Open element 41. Resize by 20%. Copy and paste as a new layer. Place over the heel of the shoe.
Open element 58. Resize by 40%. Copy and paste as a new layer. Place to the lower right corner.
Open element 60. Resize by 30%. Copy and paste as a new layer. Place in the upper right corner of your template.
Open element 29. Resize by 25%. Copy and paste as a new layer. Place over the top of the charm. Use your raster deform tool and rotate the bow slightly to the right.
Open element 1. Resize by 20%. Copy and paste as a new layer. Place slightly down and to the left of the bottle.
Open element 34. Resize by 30%. Copy and paste as a new layer. Place to the bottom center.
Open your full-size tube, resize if necessary. Copy and paste as a new layer. Mirror and move slightly to the right. Duplicate your tube, gaussian blur 3.00. Set the blend mode to overlay.
Add your name, copyright, and license info. Apply a drop shadow of choice.
Merge visible and save as a PNG.
Thanks for checking out my tutorials.
Saturday, September 8, 2012
Devilish
This tutorial was written by me on September 8th, 2012 and is my own creation. Any resemblance to any other tutorial is purely coincidental and unintentional.
This is my first tutorial using Photoshop CS3.
This tutorial assumes you have a good working knowledge of Photoshop.
Supplies:
Tube of choice. I am using the work of Elias Chatzoudis (One with a closeup works best). You can purchase it here.
PTU Anger Management kit by Designs by LK. You can purchase it here.
Template 3 by Tasha's Playground. You can find it here.
Font of choice. I am using MCF Bad Manners Wild West.
Plugins: Eye Candy 4000 Gradient Glow (optional)
--------------------
Open temp3. Set the canvas size to 683 x 683. Set the image size to 600 x 600, resample image set to Bicubic Sharpener (best for reduction). Delete the following layers: New Layer, words2, back2, words1, back1, Sexy2, Sexy1, Layer 0.
Open the wire. Image size set to 550 x 549. Ctrl+A, Ctrl+C. On the template, Ctrl+V. Move this layer to the bottom.
Open paper9. Ctrl+A, Ctrl+C. On the template, Ctrl+V. Move this layer abover layer 1. Click on layer 1 in the layer palette. Ctrl+click on the thumbnail for layer 1. On the paper9 layer, Select, Inverse and press delete on your keyboard. Ctrl+D. Delete the layer 1 layer.
Merge layers 2 and 3 together. Ctrl+click on the thumbnail for the merged layer. Add a new layer and floodfill with ec9d3e. Select, inverse and press delete on your keyboard. Ctrl+D. Filter, Noise, Add noise, amount 15, gaussian, monochromatic checked.
Merge layers 4 & 5 together. Open paper2. Ctrl+A, Ctrl+C. On the template, Ctrl+V and move this layer above the merged circle layer. With the merged circle layer highlighted in the layer palette, Ctrl+click on the thumbnail. On the paper2 layer, select, inverse and press delete on your keyboard. Ctrl+D. Delete the merged rectangle layer.
Merge all the slat layers together. Open paper8. Ctrl+A, Ctrl+C. On the template, Ctrl+V. With the merged slats layer highlighted in the layer palette, Ctrl+click on the slats thumbnail. On the paper8 layer, select, inverse an press delete on your keyboard. Ctrl+D. Delete the merged slats layer.
Open your closeup. Ctrl+A, Ctrl+C. On the slats paper layer, Ctrl+V. Move this layer so your tube is centered over the slats.
Duplicate your closeup 2 times. On the original tube layer, Filter, Noise, Add noise, 100. Filter, blur, motion blur, 90, 100. On the top closeup layer, Filter, blur, gaussian blur, 3. Set the blend mode to screen. Merge the tube layers together and lower the opacity to your liking.
Click on the slats layer. Ctrl+click on the thumbnail. On the merged tube layer, select, inverse. Press delete on your keyboard. Ctrl+D.
Open the pinchers. Ctrl+A, Ctrl+C. On the template, Ctrl+V. Select your move tool, click on the Show Transform Controls box. Rotate slightly to the right. Click on the green check mark to apply. Move the pinchers towards the bottom of the slats.
Open the barredwindow. Image size, 60%, resample image set to Bicubic Sharpener. Ctrl+A, Ctrl+C. On the working canvas, Ctrl+V. Use your mover tool, show transform controls checked, and rotate slightly to the right and apply. Untick the transform controls box.
Open flower1. Ctrl+A, Ctrl+C. On the working canvas, Ctrl+V. Move to the bottom left corner. Maximize your flower2 image again. Image size, 80%, resample image set to Bicubic Sharpener. Ctrl+A, Ctrl+C. On the working canvas, Ctrl+V. Move this flower to the upper right corner of your slats.
Open the spiderdangle. Image size set to 60%, resample image set to Bicubic Sharpener. Ctrl+A, Ctrl+C. On the working canvas, Ctrl+V. Move to the left of the slats. See my tag for reference.
Open star2. Image size set to 80%, resample image set to Bicubic Sharpener. Ctrl+A, Ctrl+C. On the working canvas, Ctrl+V. Use your transform controls again, rotate slightly to the left. Move over the top of the spiderdangle. Ctrl+V, use the transform controls to rotate this star slightly to the right. Move over the top of the barredwindow. See my tag for reference.
Open your full-size tube. Resize if necessary. Ctrl+A, Ctrl+C. On the working canvas, Ctrl+V. Move to the bottom of your template layers.
Open skulls2. Ctrl+A, Ctrl+C. On the working canvas, Ctrl+V. Move to the bottom right of your tag.
Apply a drop shadow to your layers. I used a slight drop shadow.
Add your name. Highlight your name then click on the create warped text icon. Style Arc, horizontal checked. Horizontal distortion +55, Vertical Distortion +10.
Eye Candy 4000 Gradient Glow 3, fat preset using a light and dark color from your tag.
Add a harder drop shadow on your text than the rest of your tag.
Merge visible. Apply your copyright, and license info.
Merge visible and save as a PNG.
Thanks for checking out my tutorials.
Wednesday, September 5, 2012
Witchy Blessings
This tutorial was written by me on September 5th, 2012 and is my own creation. Any resemblance to any other tutorial is purely coincidental and unintentional.
PSP Version used: PSP9, but should work in other versions.
This tutorial assumes you have a good working knowledge of PSP.
Supplies:
Tube of choice. I am using the work of Ismael Rac. You can purchase his tubes here.
PTU Witchypoo kit by Purple Kreationz. You can purchase it here.
Halloween Mask 0906 by Vix. You can download it here.
Font of choice. I am using AL Sandra.
--------------------
Open frame 3. Resize by 85%, all layers unchecked.
Open paper 15. Copy and paste as a new layer. Move this layer below your frame.
Activate your freehand selection tool, selection type point to point, mode add (shift, feather 0, smoothing 0, anti-alias checked. No click on the frame till you've made a square. Selections, invert. Make sure you are on the paper layer and press delete on your keyboard. Deselect.
Open your mask and paper1. Copy and paste your paper as a new layer, move this layer to the bottom. Apply your mask, merge group.
Open the cobweb. Resize by 60%. Copy and paste as a new layer. Place in the upper left corner. Duplicate, mirror, and flip.
Open your tube. Copy and paste as a new layer above the frame back layer. Place to your liking. Select all, float, defloat. On the frame layer, take your eraser tool and erase any part that covers the top of your tube.
Duplicate your tube, gaussian blur, 3.00. Set the blend mode to overlay. On the original tube layer, colorize to 0, 0.
Open the candle. Resize by 80%. Copy and paste as a new layer above your frame layer. Move to the bottom left.
Open the Ribbon. Resize by 85%. Copy and paste as a new layer. Place over the bottom elements in your tag.
Add your name, copyright, and license number. Apply a drop shadow of choice and merge visible.
Save as a PNG.
Thanks for checking out my tutorials.
Saturday, September 1, 2012
Gimme Some Skullz
PSP Version used: PSP9, but should work in other versions.
This tutorial assumes you have a good working knowledge of PSP.
Supplies:
Tube of choice. I am using a tube by Very Many. You can purchase this tube exclusively @ SATC.
PTU Skullz Rock 3 kit by Crystals Creations. You can purchase it here.
Template 34 by TwistedT's Playroom. You can find it here.
RB Mask 63 by Rosesblack. You can find it here.
Font of choice. I am using Fabulous.
--------------------
Open your template and delete the following layers: Raster 10, Raster 11, Copy of Raster 5, and Raster 5. Set your canvas size to 850 x 700. Resize all layers by 75%.
Open your mask and minimize.
Open pp9. Copy and paste as a new layer onto your template canvas. Apply your mask, merge group. Move this layer to the bottom.
On Raster 4 (big circle), select all, float, defloat. Open pp8. Copy and paste as a new layer. Selections, invert and press delete on your keyboard. Deselect and delete the original layer.
On Raster 7, select all, float, defloat. Open pp3. Copy and paste as a new layer. Selections, invert and press delete on your keyboard. Deselect and delete the original layer.
Open ee9. Resize by 50%. Copy and paste as a new layer. Place to the left side. Duplicate, mirror, and merge down. See my tag for reference.
On Raster 8 (smaller circle), select all, float, defloat. Open pp1. Copy and paste as a new layer. Move slightly down, selections, invert and press delete on your keyboard. Deselect and delete the original layer.
On Raster 6 (the 4 rectangles), select all, float, defloat. Open pp5. Copy and paste as a new layer. Selections, invert and press delete on your keyboard. Deselect and delete the original layer.
On Raster 2, select all, float, defloat. Maximixe pp3, copy and paste as a new layer. Selections, invert and press delete on your keyboard. Deselect and delete the original layer.
Create a gradient with #fe00b8 and #01dbff, angle 153, repeats 1.
On Raster 3, select all, float, defloat. Add a new raster layer and floodfill with your gradient. Deselect and delete the original layer.
Open your tube & resize as necessary. Copy and paste as a new layer. Duplicate twice and arrange your tubes over each square to your liking. Merge the tube layers together. Duplicate, gaussian blur 3.00. Set the blend mode to screen, opacity 80. On the original tubes layer, set the blend mode to luminance (L), opacity 50.
Open ee38. Resize by 80%. Copy and paste as a new layer and place to the bottom of the template.
Open ee15. Resize by 50%. Copy and paste as a new layer. Place to the bottom between the second and third tube. Rotate slightly to the right. Duplicate, mirror and place to the top of your first and second tubes. See my tag for reference.
Open ee3. Resize by 40%. Copy and paste as a new layer. Place to the left of the tube on the far left.
Open ee1. Resize by 55%. Copy and paste as a new layer. Place to the bottom left of the bottle. See my tag for reference.
Open ee4. Resize by 40%. Copy and paste as a new layer. Place to the right of your cupcake.
Open ee10. Resize by 40%. Copy and paste as a new layer. Place to the bottom and between the cupcake and skull candy.
Open ee20. Resize by 40%. Copy and paste as a new layer. Place to the upper right corner of the third tube. Rotate slightly to the right.
Open ee24. Resize by 40%. Copy and paste as a new layer. Place to the lower right side.
Add your name, copyright, and license number. Apply a drop shadow of choice.
Merge visible and save as a PNG.
Thanks for checking out my tutorials.
Thursday, August 30, 2012
Runaway
This tutorial was written by me on August 30th, 2012 and is my own creation. Any resemblance to any other tutorial is purely coincidental and unintentional.
PSP Version used: PSP9, but should work in other versions.
This tutorial assumes you have a good working knowledge of PSP.
Supplies:
Tube of choice. I am using a soon-to-be-released tube from the amazing Arthur Crowe. Keep an eye out for this beauty in his store!
PTU Emo Girl Red kit by Purple Kreationz. You can purchase it here.
RB Mask 47 by Rosesblack. You can find it here.
Font of choice. I am using Janda Silly Monkey.
--------------------
Open a blank transparent image, 600 x 600.
Open your mask and paper 13. Copy and paste your paper as a new layer onto your blank canvas. Merge group.
Open the splat. Copy and paste as a new layer. Move to the bottom. Duplicate, flip, & mirror. Merge down.
Open frame 3. Resize by 85%. Copy and paste as a new layer. With your magic wand click inside the frame. Selections, modify, expand by 10. Open paper 19. Copy and paste as a new layer. Selections, invert and press delete on your keyboard. Deselect. Move this layer below your frame layer.
Open the box from the desktop. Copy and paste as a new layer. Move this layer above your frame layer. Place to the bottom.
Open ribbon2. Copy and paste as a new layer. Place over the box. If not using the same tube, place under the tube towards the bottom. Use your raster deform tool to straighten the ribbon.
Open the beadedhearts. Copy and paste as a new layer. Place over the ribbon.
Open the lolli. Resize by 60%. Copy and paste as a new layer. Place in the upper left corner. Rotate slightly to the left.
Open lolli2. Repeat the steps above but rotate to the right. Place over the first lolli. See my tag for reference.
Ok now open your tube. Copy and paste as a new layer. Place so she is sitting on the box.
Open the ipod. Resize by 60%. Copy and paste as a new layer. Place just inside of her right foot at the bottom.
Open the milkshake. Resize by 80%. Copy and paste as a new layer. Place to the bottom right.
Open the lips. Resize by 50%. Copy and paste as a new layer. Place to the upper right side. Rotate slightly to the right.
Open the butterfly. Resize by 50%. Copy and paste as a new layer. Place to the bottom, slightly to the left of her left shoe. Rotate slightly to the left.
Open the cat. Resize by 50%. Copy and paste as a new layer. Place to the bottom left corner.
Open the cuppy. Resize by 50%. Copy and paste as a new layer. Place to the bottom right.
Add your name, copyright, and license info.
Apply a drop shadow of choice.
Merge visible and save as a PNG.
Thanks for checking out my tutorials.
Subscribe to:
Posts
(Atom)
Grab My Blinkie
