This tutorial was written by me on January 24th, 2013 and is my own creation. Any resemblance to any other tutorial is purely coincidental and unintentional.

PSP Version used: PSP X4, but should work in other versions.

This tutorial assumes you have a good working knowledge of PSP.

Supplies:

Tube of choice. I am using the amazing work of Arthur Crowe. You can purchase his work here. 

PTU coodinating kit Lollyta by Purple's Kreationz. You can only find this kit here. 

Mask 159 by Insatiable Dreams. You can find it here. 

Font of choice. I am using CF Revolution.

Filters:

Xero Porcelain

--------------------

Open frame 2. Resize by 80%. Open a new image, 600 x 600. Copy and paste your frame as a new layer.

Use your magic wand and click inside the frame. Selections, modify, expand by 10. Open paper 8. Copy and paste as a new layer. Selections, invert and press delete. Deselect. Move this layer below the frame layer.

Open your tube or a close-up. Copy and paste as a new layer. On the frame layer, click inside the frame with your magic wand. Modify, expand by 10. On the tube layer, selections, invert and press delete. Deselect.

Xero Porcelain, 50, 128, 155. Red, green, and blue all set to 0.

Duplicate, gaussian blur 3.00. Set the blend mode to screen, opacity 36. On the original tube layer, set the opacity to 12.

Open your mask and paper 3. Copy and paste your paper as a new layer. Apply your mask, merge group. Move to the bottom.

Open element 6. Resize by 90%. Copy and paste as a new layer. Place to the top.

Open element 3. Resize by 92%. Copy and paste as a new layer. Place to the top so that it peeks out towards the top of the frame.

Open element 23. Resize by 50%. Copy and paste as a new layer above your frame layer. Place to the top of your frame.

Open your tube and resize as necessary. Copy and paste as a new layer. Place to the left side. 

Xero Radiance using the same settings as before.

Open element 28. Resize by 60%. Copy and paste as a new layer. Rotate slightly to the left. Duplicate, flip horizontal (mirror). Place to the right. Merge these two layers together and place to the right side.

Open element 24. Resize by 55%. Copy and paste as a new layer. Place to the bottom of the lolli's.

Open element 19. Copy and paste as a new layer. Place to the bottom of your tag.

Open element 14. Resize by 90% Copy and paste as a new layer. Place to the bottom of the speakers.

Open element 16. Resize by 90%. Copy and paste as a new layer. Place over the ribbon.

Open element 2. Resize by 50%. Copy and paste as a new layer. Place to the upper right, along the frame. Rotate slightly to the right.

Open element 12. Resize by 80%. Hue and saturation, colorize, 0, 0. Copy and paste as a new layer. Place over the top of the speakers.

Open element 21. Resize by 50%. Copy and paste as a new layer. Place over the right end of the chain. Rotate slightly to the right. Duplicate, flip horizontal. Place over the left end of the chain.

Open element 30. Flip horizontal. Copy and paste as a new layer.

Add your name, copyright, and license info. Apply a drop shadow of choice. Merge visible and save as a PNG.

Thanks for checking out my tutorials.

This tutorial was written by me on December 11th, 2012 and is my own creation. Any resemblance to any other tutorial is purely coincidental and unintentional.

PSP Version used: PSP9, but should work in other versions.

This tutorial assumes you have a good working knowledge of PSP.

Supplies:

Tube of choice. I am using the work of Arthur Crowe. You must purchase his work and acquire a license to use his art. You can find his work here. 

PTU Angelical Eyes kit from Toxic Desirez for Arthur Crowe's Factory. This kit is only available from Arthur Crowe's Factory.

Collab Template 01 MPM-SR. This is an exclusive template only available to members 

of the KIT Forum. You can join us here. 

Mask WH-CM Exclusive #1 by WitchysHeart for the Creative Misfits. You can download it here. 

Font of choice. I am using LHF Stanford Script.

Filter: Alien Skin Eye Candy 5: Impact Bevel

--------------------

Open your template and mask. Minimize your mask. On your template, resize all layers by 86% and merge together these layers: 1 & 2; 4 & 5; 9 & 10; 11 & 12; 13 & 14.

Open Paper 10. Copy and paste as a new layer onto your template. Move this layer to the bottom. Apply your mask, merge group. Add noise, gaussian, 100, monochrome checked.

On the black squares layer, select all, float, defloat. Open Paper 4. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original layer.

On layer 3, the lower right white square layer, select all, float, defloat. Open Paper 9. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original layer. Repeat for layer 6, the upper left white square.

On the small blue circles layer, select all, float, defloat. Open Paper 7. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original layer. On layer 7, select all, float, defloat. Set your foreground to #f0f0f0 and your background to #f1c7a4. Set your foreground to the foreground-background gradient, style sunburst, repeats 0. Add a new raster layer and floodfill with your gradient. Deselect and delete the original layer.

On layer 8, select all, float, defloat. Add a new raster layer and floodfill with #f0f0f0. Add noise with the same settings as before. Deselect and delete the original layer.

Open the Vines. Resize by 80%. Copy and paste as a new layer. Place to the left side. Duplicate and mirror. Merge these two layers together.

Open the Moon. Resize by 50%, mirror. Copy and paste as a new layer. Place to the upper left corner.

On the small light gray square layer, select all, float, defloat. Open Paper 10. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original layer.

Open your tube. Copy and paste as a new layer. Copy and paste as a new layer and place over the small square on the right side. Duplicate and mirror and place over the square on the left side. Merge these two layers together. On the small square layer, select all, float, defloat. On your tubes layer, selections, invert and press delete. Deselect.

Duplicate your tubes layer. Gaussian blur, 3.00. Set the blend mode to screen, opacity 46. On the original tubes layer, set the opacity 26.

On the dotted frame layer, manual color correction. Set the source to #050505 and the target to #f0f0f0. Add noise with the same settings as before.

On the medium gray frame layer, select all, float, defloat. Using the same colors as before, set the foreground to the same gradient, but this time set the style to linear, angle 45, repeats 3. Add a new raster layer and floodfill with your gradient. Deselect and delete the original layer.

Eye Candy 5: Impact Bevel using the following settings:

Basic tab - 27.32, 27, 100.00, 0, Inside Selection checked, 0, Shade Interior checked, surface none.

Lighting tab - 94, 74, 80, 50, highlight color white, shadow color #f1b684.

Bevel Profile tab - Button.

Open Bow 2. Resize by 50%. Copy and paste as a new layer. Place to the upper left corner of the small square. Duplicate, miror and place over the small square on the right side.

Open the Hearts. Resize by 80%. Copy and paste as a new layer.

Open the Winged Heart. Resize by 40%. Copy and paste as a new layer. Place to the upper right corner. Rotate slightly to the right.

Open your tube again. Copy and paste as a new layer. Resize as necessary and place to your liking.

Open the String. Resize by 80%. Copy and paste as a new layer. Place to the bottom of your tube.

Open the Cupcake. Resize by 40%, mirror. Copy and paste as a new layer. Place to the lower left.

Open the Teddy. Resize by 50%. Copy and paste as a new layer. Place to the lower right.

Open the Feather. Resize by 60%. Rotate counterclockwise 90 to the left. Copy and paste as a new layer. Move to the lower left. Duplicate, mirror, and merge down. Erase any part of the vines that hang below your feathers.

Open the Ribbon. Resize by 80%. Copy and paste as a new layer. Place over the feathers.

Open Flower 1. Resize by 40%. Copy and paste as a new layer. Place in the center of the feathers.

Open the Halo. Resize by 40%. Place over the flower.

On the flower layer, select all, float, defloat. On the halo layer, use your eraser tool and erase any part on the top half of the halo that covers the flower. See my tag for reference. Deselect.

Open the Butterfly. Resize by 35%, mirror. Copy and paste as a new layer. Place just to the upper left of the flower. Rotate slightly to the right. See my tag for reference.

Open Sparkles 1. Resize by 80%. Copy and paste as a new layer.

Add your name, copyright, and license info. Apply a drop shadow of choice. Merge visible and save as a PNG.

Thanks for checking out my tutorials.

This tutorial was written by me on December 4th, 2012 and is my own creation. Any resemblance to any other tutorial is purely coincidental and unintentional.

PSP Version used: PSP9, but should work in other versions.

This tutorial assumes you have a good working knowledge of PSP.

Supplies:

Tube of choice. I am using the work of Tony Tzanoukakis. You must purchase his tubes and obtain the proper licensing. You can purchase his tubes here. 

FTU kit Merry Christmas by Kittz Kreationz for the Creative Misfits. You can find the kit here. 

Mask 435 by VixPSP. You can find it here. 

Font of choice. I am using Dear Joe 2.

--------------------

Open the xmas window. Set the canvas to 600 x 600.

Open paper XMAS4 and your mask. Copy and paste your paper as a new layer above your window. Apply your mask, merge group. Add noise, gaussian, 100, monochrome checked. With your raster deform tool, pull the edges of the mask to the edges of your canvas. Move this layer to the bottom.

Open paper XMAS5. Resize by 71%. Copy and paste as a new layer. With your raster deform tool, drag the edges just inside the outer edge of the window. See my tag for reference.

Open the xmas decorated tree. Resize by 60%. Copy and paste as a new layer.

Open the xmas berries. Resize by 60%. Copy and paste as a new layer above your window layer. Rotate to the right so the berries are vertical. Place to the right side of the window. Duplicate and rotate to the right so the berries are horizontal. Duplicate and mirror. Merge the two horizontal berries together. Place to the bottom of your window. See my tag for reference.

Highlight the vertical berries layer. Open the xmas snowman. Resize by 50%. Copy and paste as a new layer. Place slightly to the left of the vertical berries.

Open the xmas candy1. Resize by 40%. Copy and paste as a new layer. Place in front of the vertical berries, slightly down.

Open the xmas jingle bells and flowers. Resize by 92%. Copy and paste as a new layer. Place to the bottom of the window.

Open the Xmas Snowy Leaves. Rotate clockwise 90. Resize by 40%. Copy and paste as a new layer. Place to the lower right, over the bells and flowers but slightly up so the berries extend below the leaves. Duplicate, mirror and merge down. See my tag for reference.

Open your tube and resize as necessary. Copy and paste as a new layer above the merged horizontal berries. Place to the bottom of the window.

Open the xmas snowflakes white. Resize by 55%. Copy and paste as a new layer. Place to the bottom of your tube.

Open the xmas wordart. Resize by 50%. Copy and paste as a new layer. Place to the upper right so it sits on top of the window.

Add your name, copyright, and license info. Apply a drop shadow of choice. Merge visible and save as a PNG.

Thanks for checking out my tutorials.

This tutorial was written by me on December 3rd, 2012 and is my own creation. Any resemblance to any other tutorial is purely coincidental and unintentional.

PSP Version used: PSP9, but should work in other versions.

This tutorial assumes you have a good working knowledge of PSP.

Supplies:

Tube of choice. I am using a soon-to-be-released tube from Ismael Rac. Keep an eye out for this awesome tube in the near future. You can check out his store for his awesome tubes here. 

FTU Misfit Emo kit by Kittz Kreationz  for the Creative Misfits. You can find this kit here. 

Mask 158 by Insatiable Dreams. You can download it here. 

Font of choice. I am using Fucking Tag Font.

Filters: 

Filters Unlimited 2.0 

Alien Skin Eye Candy 5 Impact Bevel

--------------------

Open the Dbl frame. Set the canvas size to 600 x 500. 

Open your mask and paper 5. Copy and paste your paper as a new layer onto your frame. Apply your mask, merge group. Add noise, gaussian, 100, monochrome checked. Move this layer to the bottom.

Open Paint Splash 2. Resize by 60%. Copy and paste as a new layer. Move to the upper left side. Duplicate and flip. Move to the bottom right side. Merge these two layers together.

On your frame layer, use your magic wand and click inside each frame. Selections, modify, expand by 10. Add a new raster layer. Floodfill with a gradient using white and #52d0de. Set the gradient to linear, angle 0, repeats 0. Deselect and move this layer below your frame layer.

Filters Unlimited 2.0, Paper Textures, Canvas Fine using the default settings.

Open your tube. Copy and paste as a new layer. Place over the left frame and place to your liking. Duplicate and mirror. Place this to your liking. Merge these two layers together.

On the frame back layer, select all, float, defloat. On your merged tube layer, selections, invert and press delete. Deselect. Duplicate your tubes, gaussian blur 3.00. Set the blend mode to Overlay, opacity 32. On the original tubes layer, hue and saturation, colorize, 0, 0. Lower the opacity of this layer to 28.

Open the Heart Scatter. Resize by 80%. Erase any hearts that have been cut off at the edges. 

Alien Skin Eye Candy 5: Impact Bevel using the following settings:

Under the Basic tab, width 27.31, height 27, smoothness 100.00, round corners 0. Bevel placement inside selection checked, darken deep areas 0, shade interior checked, surface none.

Lighting tab, direction 94, inclination 74, brightness 80, highlight size 50, highlight color white, shadow color #dedede.

Bevel profile, factory profile button.

Copy and paste as a new layer above your frame layer. Place to the bottom of the frames.

Open the Label. Copy and paste as a new layer. Place to the bottom right corner of your frames.

Open the Skull Sock. Resize by 60%, mirror. Copy and paste as a new layer. Place to the right side of your frame.

Open Skull Bow 1. Resize by 40%. Copy and paste as a new layer. Place to the top of your sock.

Open the I-Pod. Resize by 65%. Copy and paste as a new layer. Place to the bottom left of your frame.

Open the Cupcake. Resize by 60%. Copy and paste as a new layer. Place slightly to the right of the I-Pod.

Open the Tattered Heart. Resize by 65%. Copy and paste as a new layer. Place over the 'Misfit' label. See my tag for reference.

Open the Butterfly. Resize by 45%. Copy and paste as a new layer. Rotate slightly to the left and place to the upper left corner of your frame. 

OPen the Wired Heart. Resize by 60%. Copy and paste as a new layer. Place to the lower right of the cupcake. Rotate slightly to the left.

Open your tube and resize as necessary. Copy and paste as a new layer.

Open the Lights. Resize by 80%. Copy and paste as a new layer and place to your liking.

Open the Emo Bear. Resize by 60%. Copy and paste as a new layer. Place to the left of the tattered heart.

Add your name, copyright, and license info. Apply a drop shadow of choice. Merge visible and save as a PNG.

Thanks for checking out my tutorials.

This tutorial was written by me on November 19th, 2012 and is my own creation. Any resemblance to any other tutorial is purely coincidental and unintentional.

PSP Version used: PSP9, but should work in other versions.

This tutorial assumes you have a good working knowledge of PSP.

Supplies:

Tube of choice. I am using the work of Tony Tzanoukakis. You must purchase his work and acquire a license to use his art. You can find his work here. 

FTU For the Love of Fall kit by Karra's Kreative Korner. You can find this kit here. 

Mask M3 by Kylie of Creative Misfits Creations. You can download it here. 

Font of choice. I am using Retroactive.

--------------------

Open a blank canvas, 600 x 600.

Open paper 8 and your mask. Copy and paste your paper onto your blank canvas. Apply mask, merge group.

Open frame 1. Resize by 80%. Copy and paste as a new layer. Move slightly up.

Use your magic wand and click inside the frame. Selections, modify, expand by 10. Open paper 4. Copy and paste as a new layer. Selections, invert and press delete. Deselect and move this layer below your frame layer.

Open the bricks. Copy and paste as a new layer above your frame layer. Move to the left side of your tag.

Open the birdcage. Resize by 50%. Copy and paste as a new layer. Place over the bricks.

Open the cluster. Copy and paste as a new layer. Place on the top of the frame.

Open bow 2. Resize by 40%. Copy and paste as a new layer. Place to the top middle of the frame.

Open the clouds. Resize by 95%. Copy and paste as a new layer.

Open the light. Resize by 90%, mirror. Copy and paste as a new layer. Place to the left side of your tag.

Open leaf 2. Resize by 50%. Copy and paste as a new layer. Place to the bottom right of your tag. Duplicate and mirror.

Open leaf 3. Resize by 50%. Copy and paste as a new layer. Move slightly down from the first leaf on the right. Duplicate and mirror. See my tag for reference.

Open leaf 1. Resize by 50%. Copy and paste as a new layer. Place to the bottom and slightly to the left of your leaves on the lower right. Duplicate and mirror.

Open the heart scatter. Copy and paste as a new layer. Place over the leaves.

Open the sparkle, mirror. Copy and paste as a new layer.

Open your tube and resize as necessary. Copy and paste as a new layer. Place to your liking.

Open the love birds. Resize by 30%. Copy and paste as a new layer. Place to the lower right corner.

Add your name, copyright & license info. 

Apply a drop shadow of choice. I am using 2, -2, 40, 5, black.

Merge visible and save as a PNG.

Thanks for checking out my tutorials.

This tutorial was written by me on November 14th, 2012 and is my own creation. Any resemblance to any other tutorial is purely coincidental and unintentional.

PSP Version used: PSP9, but should work in other versions.

This tutorial assumes you have a good working knowledge of PSP.

Supplies:

Tube of choice. I am using the amazing work of Ismael Rac. You must purchase his work and acquire a license to use his art. You can find his work here. 

My supplies here. 

Template 117 by Amy & Leah's Gimptastic Tuts. You can find it here. 

Mask4Christmas2010 by Vix. You can download it here. 

Font of choice. I am using St. Nicholas.

Filters:

Penta.com Dot and cross

Filters Unlimited 2.0

--------------------

Open your template and mask. Minimize your mask for now.

On the template, set your canvas size to 650 x 650. Resize all layers by 92%. Delete the credits layer and the wordart layers.

Open the paper from the supplies. On the background layer, copy and paste as a new layer. Apply your mask, merge group. You can delete the background layer.

Merge together the square 1 and square 2 layer. Select all, float, defloat. Add a new raster layer. Create a gradient using #ffe8a0 and #e4ae48, angle 48, repeats 5. Floodfill your selection with the new gradient. Deselect and delete the original layer.

Open the DiscoBall. Resize by 35%. Copy and paste as a new layer above the circle 1 layer. Place over the circle on the right side. Duplicate and mirror. Place over the circle on the left side. Merge the two discoball layers together, mirror. Now you can delete the circle 1 and circle 2 layer.

On the rect layer, manual color correction. Set the source to #10350f and the target to #3556ae.

On the thin rect layer, select all, float, defloat. Add a new raster layer and floodfill with the gold gradient, but change the repeats to 3. Deselect and delete the original layer.

Filters Unlimited 2.0, Paper Textures, Canvas Fine using the default settings.

Create a new gradient. The colors should be entered in this order in the gradient editor from left to right: #ffe8a0, #e4ae48, #b32127, #b32127, #3556ae, #1c2f71

Your gradient editor should look like this:

Set the gradient to angle 0, repeats 1, invert checked, style linear.

On the diamond layer, select all, float, defloat. Add a new raster layer and floodfill with your gradient. Deselect and delete the original layer. 

Penta.com Dot and Cross using the default settings.

Open your tube or a closeup. Copy and paste as a new layer, mirror. Arrange over the diamond to your liking. On the diamond layer, select all, float, defloat. On the closeup layer, selections, invert and press delete. Deselect. Set the blend mode to overlay, opacity 56.

On the diamond layer again, select all, float, defloat. Selections, modify, set selection borders, both sides checked, width 3, anti-alias checked. Add a new raster layer and floodfill with the same gold gradient that we used previously. Add noise, gaussian, 100, monochrome checked. Deselect. Move this layer above your closeup layer.

Open the flower. Resize by 12%. Copy and paste as a new layer. Place to the upper right corner of the gold gradient rectangle layer. Duplicate and place to the lower left corner.

Merge the candy cane layers together. Use your magic wand and click on the red part of each candy cane. Manual color correction, source set to #d61e26 and your target set to #b32127.

Open the ribbon. Resize by 21%, mirror. Copy and paste as a new layer. Place to the bottom of your template.

Open the martini. Resize by 60%. Copy and paste as a new layer. Place to the lower right corner.

Open the sparkles. Resize by 93%. Copy and paste as a new layer.

Open your tube and resize as necessary. Copy and paste as a new layer and place to the bottom of your tag.

Add your name, copyright, and license info. Apply a drop shadow of choice and merge visible. Save as a PNG.

Thanks for checking out my tutorials.

This tutorial was written by me on November 12th, 2012 and is my own creation. Any resemblance to any other tutorial is purely coincidental and unintentional.

PSP Version used: PSP9, but should work in other versions.

This tutorial assumes you have a good working knowledge of PSP.

Supplies:

Tube by Roman Zaric. You must purchase his work and obtain the proper licensing to use his art. You can do so here.

FTU kit Heartfelt Rose by Wicked Princess Scraps. You can find it here. 

Font of choice. I am using Zenith Script ES

--------------------

Open WP_HR_GOLDFRAME. Set the canvas size to 800 x 800. Resize the frame by 85%, all layers unchecked. Rotate the frame slightly to the left. Now resize all layers by 75%. Duplicate and set the blend mode to overlay. Merge down.

Open WP_HR_DOUBLEHEARTFRAME. Resize by 75%. Copy and paste as a new layer. Place to the upper left corner. Duplicate, mirror, and flip. Merge these two layers together. Move to the bottom layer.

On your gold frame layer, use your magic wand and click inside the frame. Selections, modify, expand by 10.

Open WP_HR_PP13. Copy and paste as a new layer. Selections, invert and press delete. Deselect and move this layer below the gold frame layer.

Open WP_HR_BEADS. Copy and paste as a new layer. Move this layer just above the heart frames layer.

Open your tube of choice. Copy and paste as a new layer just above the paper layer. Mirror your image and place to your liking. On the paper layer, select all, float, defloat.  On the tube layer, selections, invert and press delete. Duplicate your tube layer. Gaussian blur, 3.00. Set the blend mode to screen, opacity 60. On the original tube layer, set the blend mode to soft light. Apply a drop shadow of choice to this layer.

Copy and paste your tube again above the gold frame layer, resizing as necessary. Place to the left side of your frame.

Open WP_HR_PEARLRIBBON. Resize by 81%. Copy and paste as a new layer. Place to the bottom of the frame. Erase any part of the tube that hangs below this element.

Open WP_HR_BEADEDSPRAY. Resize by 76%. Copy and paste as a new layer. Place over the ribbon.

Open WP_HR_TRELLIS. Resize by 80%. Copy and paste as a new layer. Place to the right side of your frame.

Open WP_HR_DOUBLEHEART. Resize by 50%. Copy and paste as a new layer. Place to the bottom left corner of your tag.

Open WP_HR_BOOK. Resize by 40%. Copy and paste as a new layer. Place to the bottom right of your tag. Rotate slightly to the right. Using the font of your choice, write out 'All My Love' on the left hand side of the book.

Open WP_HR_CORSAGE. Resize by 50%. Copy and paste as a new layer. Place over the right hand side of the book.

Open WP_HR_ROSECANDLE. Resize by 40%, mirror. Copy and paste as a new layer. Place to the right of the double heart.

Add your name, copyright, and license info. Apply a drop shadow of choice to your layers. Merge visible and save as a PNG. 

Thanks for checking out my tutorials.

This tutorial was written by me on November 4th, 2012 and is my own creation. Any resemblance to any other tutorial is purely coincidental and unintentional.

PSP Version used: PSP9, but should work in other versions.

This tutorial assumes you have a good working knowledge of PSP.

Supplies:

PTU tube & coordinating kit only available from Arthur Crowe's Factory. You must purchase Arthur's work and obtain the proper licensing. You can find both the kit & tube here. 

Template 100mpm by Millie's PSP Madness. You can download it here. 

Mask019 by VixPSP. You can download it here. 

Font of choice. I am using Stephanie Marie JF.

Filters: 

Penta.com Dot and Cross

Filters Unlimited 2.0 Pool Shadow Framed

EyeCandy 4000 Glass & Gradient Glow (for text, please use your own settings)

Xero Porcelain

--------------------

Open your template. Resize all layers by 86%. Delete the credits layer.

Open your mask and Paper 6. Copy and paste your paper as a new layer just above the background layer. Apply your mask, merge group. Using your raster deform tool, pull the edges of the mask layer to the edges of your canvas.

On Raster 5, select all, float, defloat. Open Paper 7. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original layer.

On Raster 4, select all, float, defloat. Open Paper 3. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original layer.

Open the Chain Link Fence. Resize by 80%. Copy and paste as a new layer.

On Raster 8, select all, float, defloat. Open Paper 5. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original layer.

On Raster 9, manual color correction. Set the source color to black, target color to white. Add noise, gaussian, 100, monochrome checked.

Merge Raster 7 and Copy of Raster 7 together. Select all, float, defloat. Open Paper 2. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original layer.

Open your tube or a close-up tube. The tube I'm using comes with a closeup. Copy and paste as a new layer. Place over the left purple square. Duplicate and mirror. Arrange till you're satisfied and merge the two tube layers together. On the purple squares layer, select all, float, defloat. On the merged tubes layer, selections, invert and press delete. Deselect. Duplicate your tubes layer, gaussian blur 3.00. Set the blend mode to screen, opacity 50. On the original tube layer, lower the opacity to 50.

Merge Raster 2 and Copy of Raster 2 together. Manual color correction, change the target to #3d3b3c.

On Raster 3, select all, float, defloat. Add a new raster layer. Set your foreground color to white and your background color to #8c5ea7. Create a new gradient with these two colors, style sunburst, repeats 0, horizontal 51, vertical 100, link center and focal points checked. Floodfill your selection with this gradient. Deselect and delete the original layer.

Penta.com Dot and Cross. Lower the amount to 60.

Open the City Scene. Copy and paste as a new layer over the gradient layer. Place to the bottom of this layer. Duplicate, mirror and move slightly up. Move this layer below the original city scene layer. Merge these two layers together. On the gradient layer, select all, float, defloat. On the city scene layer, selections, invert and press delete. Deselect.

On the gradient layer again, select all, float, defloat. Selections, modify, set selection borders, both sides checked, border width 3, anti-alias checked. Add a new raster layer. Create a new gradient, change your white color to #3d3b3c, angle 45, repeats 3, style linear. Floodfill your selection with the new gradient. Add noise with the same settings as before.

On Raster 6, add noise with the same settings as before.

Open the Cuffs. Copy and paste as a new layer and place on the top of the frame layer.

Open the Speaker. Resize by 60%. Copy and paste as a new layer. Place to the lower right.

Open your tube and resize as necessary. Copy and paste as a new layer, place to your liking.

Xero Porcelain, increase the brightness to 158, blue channel set to 0.

Open Ribbon 2, mirror. Copy and paste as a new layer. Place to the bottom of your tag, slightly to the left.

Open the headphones. Resize by 60%. Copy and paste as a new layer. Place to the upper left corner of your frame. Rotate slightly to the left.

Open the Bottle. Resize by 60%. Copy and paste as a new layer. Place to the left side of the speaker.

Open Bow 3, mirror. Resize by 60%. Copy and paste as a new layer. Place to the top right on the right square. See my tag for reference.

Open the Drum Set. Resize by 50%. Copy and paste as a new layer and place to the bottom left.

Open Lips 2. Resize by 50%. Copy and paste as a new layer. Rotate slightly to the left and place to the right side.

Open the Sparkles. Copy and paste as a new layer.

Add your name, copyright and license info. Apply a drop shadow of choice and merge visible.

Save as a PNG.

Thanks for checking out my tutorials.

This tutorial was written by me on October 15th, 2012 and is my own creation. Any resemblance to any other tutorial is purely coincidental and unintentional.

PSP Version used: PSP9, but should work in other versions.

This tutorial assumes you have a good working knowledge of PSP.

Supplies:

Tube of choice. I am using the work of Ismael Rac, a PTU artist. You must purchase his work and obtain the proper licensing. You can do so here. 

PTU Rock Revolution III kit. You can only purchase this kit at Ismael's Store.

Mask 160 by Insatiable Dreams. You can find it here. 

Font of choice. I am using See You Tomorrow Bright and Early.

--------------------

Open frame 2. Resize all layers by 75%. Now Resize the frame layer (all layers unchecked) by 75%. Rotate the frame slightly to the right.

Open your mask and paper 1. Copy and paste paper 1 as a new layer. Apply your mask, merge group. Move this layer to the bottom.

Set your foreground color to #efbbd5 and your background color to #9b89ab. Click on the foreground color and select the gradient tab. Create a linear gradient with these colors, angle 0, repeats 0, invert checked.

On the frame layer, use your magic wand tool and click inside the frame. Selections, modify, expand by 10. Add a new raster layer and floodfill with your gradient. Move this layer below your frame layer.

Apply artistic effects>halftone with the following settings:

Round, 8

Angle 145

Use as overlay checked, Overlay, opacity 12

Greyscale ticked, ink black, background white, transparent unchecked.

Open the CITY. Resize by 80%. Copy and paste as a new layer. Move this layer just above the mask layer. Arrange so the top of the buildings peek out the top.

Open the WIRE. Copy and paste as a new layer. Rotate slightly to the left.

Open STRING1, flip. Copy and paste as a new layer. Place to the right side of your canvas. Duplicate and mirror.

Open your tube or a closeup. Copy and paste as a new layer and move just above the gradient layer. Duplicate twice. Arrange the 3 tubes to your liking. For the middle and right side tube, merge together. On the gradient layer, select all, float, defloat. On the two tube layers, selection, invert and press delete. Deselect. On the merged tubes layer, duplicate. Gaussian blur 3.00, set the blend mode to screen, opacity 80. On the original merged tubes layer, set the blend mode to luminance (L), opacity 16.

For the remaining tube layer, duplicate, gaussian blur 3.00. Set the blend mode to screen, opacity 80. On the original tube layer, set the blend mode to luminance (L), opacity 80.

Open the MUSICKEYBOARD. Resize by 85%. Copy and paste as a new layer. Place to the bottom.

Open the MUSICNOTES. Resize by 85%. Copy and paste as a new layer. Place towards the top of the frame.

Open the GLITTERSTARS. Resize by 60%. Copy and paste as a new layer. Place to the upper right corner.

Open the PICK. Resize by 50%. Copy and paste as a new layer. Place to the bottom right.

Open FLOWER3. Resize by 60%. Copy and paste as a new layer. Place to the left of the pick. Duplicate and place to the inside bottom left corner of the frame and move slightly up. See my tag for reference.

Open the CANDLE. Resize by 60%. Copy and paste as a new layer. Place between the flower and pick.

Open the CHOKER. Resize by 60%. Hue and saturation, colorize, 0, 0. Copy and paste as a new layer. Place to the bottom of the candle.

Open the KNUCKLERINGS. Resize by 60%. Copy and paste as a new layer. Place slightly to the right bottom of your tag. See my tag for reference.

Open SPARKLES2. Copy and paste as a new layer.

Open your full-size tube. Copy and paste as a new layer. Place to the right side of your tag. Duplicate, gaussian blur 3.00. Set the blend mode to overlay. On the original tube layer, colorize with the same settings as before.

Open the CHARM. Resize by 50%. Copy and paste as a new layer. Place to the upper left corner of the frame. Rotate slightly to the right.

Open BOW1. Resize by 50%. Copy and paste as a new layer. Place over the top of the charm.

Open the SCREW. Resize by 30%. Copy and paste as a new layer. Place over the center of the bow.

Open the DRUMS. Resize by 80%. Copy and paste as a new layer. Place to the bottom left corner.

Open the SPARKLES. Copy and paste as a new layer.

Add your name, copyright, and license info. Apply a drop shadow of choice.

Merge visible and save as a PNG.

Thanks for checking out my tutorials.

This tutorial was written by me on October 8th, 2012 and is my own creation. Any resemblance to any other tutorial is purely coincidental and unintentional.

PSP Version used: PSP9, but should work in other versions.

This tutorial assumes you have a good working knowledge of PSP.

Supplies:

Amie tube & matching kit from Roman Zaric. You can find them in his store. 

Template 32 by Millie's PSP Madness. You can find it here. 

Font of choice. I am using Rebecca.

Filters: 

Eye Candy 4000 Gradient Glow 

--------------------

Open your template and delete the credits layer & background layer. Set the canvas size to 700 x 700. Resize all layers by 86%.

Open the GLITTERSPLATS. Copy and paste as a new layer onto your template and then mirror. Move this layer to the bottom.

On layer 1, select all, float, defloat. Open paper 2. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original layer.

Merge together layers 2 and 3. Select all, float, defloat. Open paper 10. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original layer.

On raster 4, select all, float, defloat. Open paper 11. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original layer.

On layer 5, select all, float, defloat. Open paper 6. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original layer. Repeat for layer 8.

In the materials palette, set your foreground to #20cf98 and your background to #422a66. Click on your foreground color, select the gradient tab. Choose the foreground-background gradient, angle 50, repeats 0, style linear.

On layer 6, select all, float, defloat. Add a new raster layer and floodfill with your gradient. Delete the original layer.

On layer 7, Eye Candy 4000 Gradient Glow. Under the basic tab, set the width to 3.00. Under the color tab, select the fat preset.

Open the WIRE. Resize by 90%. Copy and paste as a new layer above the top star.

Create another gradient but change the background color to #009f71 and the angle to 0.

On layer 9, select all, float, defloat. Add a new raster layer and floodfill with the new gradient. Deselect and delete the original layer.

Open your tube and arrange several copies over the 'ZARIC' text. When you are satisfied, merge the tube layers together. On the 'ZARIC' text layer, select all, float, defloat. On the merged tubes layer, selections, invert and press delete. Deselect. Duplicate the merged tubes layer, gaussian blur 3.00. Set the blend mode to screen. On the original tubes layer, set the blend mode to luminance (L). On the 'ZARIC' text layer use your magic wand and click outside the text. On the original merged tubes layer press delete. Repeat for the gaussian blur tubes layer. Deselect.

Apply the same gradient glow you used previously to layer 10.

Open the BAG. Resize by 80%. Copy and paste as a new layer. Place to the lower right corner.

Open RIBBON2 and mirror. Copy and paste as a new layer. Place to the bottom of your tag.

Open the SPARKLES. Copy and paste as a new layer.

Open the HEARTSTRING. Copy and paste as a new layer. Mirror and place to the bottom of your tag.

Open your tube again and resize as neccessary. Copy and paste as a new layer. Place to the left side. Duplicate, gaussian blur 3.00. Set the blend mode to overlay. On the original tube layer, hue and saturation, colorize, 0, 0.

Open the MARTINI. Resize by 60%. Copy and paste as a new layer. Place to the right side of the bag.

Open SKULL3. Resize by 40%. Copy and paste as a new layer. Place to the upper right corner.

Open the CHERRIES. Resize by 40%. Copy and paste as a new layer. Place slightly down and to the right of the skull. Rotate slightly to the right.

Open BOW2. Resize by 30%. Copy and paste as a new layer. Place on the stem of the martini.

Open the GLASSES. Resize by 50%. Copy and paste as a new layer. Place to the bottom left of the martini glass.

Add your name, copyright, and license info. Apply a drop shadow of choice.

Merge visible and save as a PNG.

Thanks for checking out my tutorials.

*Click on image to view larger

This tutorial was written by me on October 6th, 2012 and is my own creation. Any resemblance to any other tutorial is purely coincidental and unintentional.

PSP Version used: PSP9, but should work in other versions.

This tutorial assumes you have a good working knowledge of PSP.

Supplies:

Sweet Princess tube and matching kit by Arthur Crowe. These will be released in the near future so keep a look out for both of these in his store. 

Bordermask_02 by Babs Bitzy Designz. You can find it here. 

Font of choice. I am using Jellyka Delicious Cake.

Filters: 

Eye Candy 4000 Gradient Glow (for text, optional)

AAA Frames Foto Frames

--------------------

Open a blank canvas 849 x 313.

Open paper 10. Copy and paste as a new layer. Move to the left side so the right edge ends in the middle of your canvas. Duplicate and move this layer to the right. Arrange so you have a seamless background and merge visible. Now flip and move slightly down. See mine for reference.

Open your tube and move to the left side. Duplicate, mirror, and merge down. Duplicate again, gaussian blur 3.00, set the blend mode to screen, opacity 50. On the original tubes layer hue and saturation, colorize, 0, 0. Set the blend mode to soft light, opacity 50.

Open element 13. Copy and paste as a new layer. Move slightly to the left. Duplicate and mirror.

Open element 16. Resize by 70%. Copy and paste as a new layer. Place to the far left.

Open element 4. Resize by 60%. Copy and paste as a new layer. Move to the far right.

Open your mask and paper 6. Copy and paste your paper as a new layer. Create a seamless pattern the same way we did the background layer. Apply your mask to this layer, merge group. Move it slightly down so it's just covering the bottom half.

Open element 5. Resize by 60%. Copy and paste as a new layer. Place slightly to the left along the top of the mask edge. Rotate slightly to the left. Duplicate and mirror. See mine for reference.

Open element 11. Copy and paste as a new layer. Place to the lower left. Duplicate and mirror.

Open element 28. Resize by 60%. Copy and paste as a new layer. Place to the bottom left, along the ribbon. Duplicate and mirror. See mine for exact placement.

Open element 23. Copy and paste as a new layer and place to the top of your canvas.

Open element 24. Copy and place as a new layer. Place to the left. Duplicate and place over the right side. Arrange to your liking.

Open your tube again and resize as necessary. Copy and paste as a new layer. Place her in the center.

Apply a drop shadow of choice to your layers, merge visible.

AAA Frames - Foto Frame. Change the width to 0 and the matte to 1.

Add your name and copyright according to FB requirements as shown in my timeline. 

Apply the gradient glow to your text, if desired.

Save as a PNG.

Thanks for checking out my tutorials.

This tutorial was written by me on September 28th, 2012 and is my own creation. Any resemblance to any other tutorial is purely coincidental and unintentional.

PSP Version used: PSP9, but should work in other versions.

This tutorial assumes you have a good working knowledge of PSP.

Supplies:

Tube of choice. I am using the work of Arthur Crowe. This tube is yet to be released so keep an eye out for this beauty in his store. 

PTU Best of Rock kit by Scrap Rebellion. This kit can only be purchased in Arthur Crowe's store. This kit will be released with this tube in the near future.

Template 15 by Millie's PSP Madness. You can find it here. 

Gemsmask 141 by Gems Taggin Scraps.  You can find it here. 

Font of choice. I am using Angryblue Controlled.

Filters: Eye Candy 4000 Gradient Glow

--------------------

Open your template and mask, minimize your mask. On your template, set the canvas size width to 750 and lock aspect ratio checked. Resize all layers by 80%.

Delete the credits layer.

Select the background layer. Open paper 4. Copy and paste as a new layer. Apply your mask, merge group. Delete the background layer.

Select your raster deform tool. Pull the edges of the mask to the edges of your canvas.

On layer 1, select all, float, defloat. Open paper 10. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original layer.

On layer 2, select all, float, defloat. Open paper 5. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original layer.

On layer 3, select all, float, defloat. Open paper 6. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original layer.

Merge together layers 4 and 5. Select all, float, defloat. Open paper 2. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original layer.

On layer 6, select all, float, defloat. Open paper 8. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original layer.

On layer 7, select all, float, defloat. Open paper 1. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original layer.

Open your tube. Copy and paste as a new layer and place to your liking. On the paper 1 layer, select all, float, defloat. On the tube layer, selections, invert and press delete. Deselect. Duplicate your tube, gaussian blur 3.00. Set the blend mode to screen, opacity 60. On the original tube layer, set the blend mode to luminance (L), opacity 60.

In the materials palette, set the foreground to #c96937 and your background set to #1e2225. Click on your foreground and click on the gradient tab. Select the foreground-background gradient, angle 45, repeats 3, style linear.

On layer 8, select all, float, defloat. Add a new raster layer and floodfill with your gradient. Deselect and delete the original layer. On the gradient frame layer, add noise, gaussian, 100.

Open element 20. Resize by 85%. Copy and paste as a new layer.

Open element 14. Resize by 40%. Copy and paste as a new layer. Place to the upper left side of your tag. Rotate slightly to the left. See my tag for reference.

Open element 6 and mirror. Copy and paste as a new layer. Place on the top left of your frame.

Open your tube. Copy and paste as a new layer, resize if necessary. Use your eraser tool to delete any part of the tube that hangs below your template layers.

On layers 10 and 11, manual color correction. Set the source to #6046b0 and your target to #df8a4a. Merge all your wordart layers together.

Eye Candy 4000 Gradient Glow. On the Basic tab, change the glow width to 3.00. Under the color tab, use these settings:

Open element 12. Resize by 30%. Copy and paste as a new layer. Place to the upper right corner of your frame.

Open element 10. Resize by 50%. Copy and paste as a new layer. Place to the lower left corner.

Open element 18. Resize by 40%. Copy and paste as a new layer. Place to the lower right corner.

Open element 13. Resize by 40%. Copy and paste as a new layer. Place to the bottom right of the spray can. Rotate slightly to the left.

Add your name, copyright, and license info.

Apply a drop shadow of choice and merge visible. Save as a PNG.

Thanks for checking out my tutorials.