Friday, March 29, 2013

Gypsy Magick

This tutorial was written by me on March 29th, 2013 and is my own creation. Any resemblance to any other tutorial is purely coincidental and unintentional.

PSP Version used: PSP X5, but should work in other versions.

This tutorial assumes you have a good working knowledge of PSP.

Supplies:

Tube of choice. I am using the beautiful work of FTU artist, Brooke Gillette. You can find her work here.

PTU kit Gypsy by Inzpired Creationz. You can purchase it here.

Mask 5 by Melissa of the Creative Misfits Creations. You can find it here.

Font of choice. I am using La Jolla ES

--------------------

Open a blank image, 600 x 600.

Open your mask & Paper 6. Copy and paste your paper as a new layer onto the blank canvas. Apply your mask, merge group.

Open Frame 2. Resize by 75%. Copy and paste as a new layer.

With your magic wand, click in side the frame. Selections, modify, expand by 10. Open Paper 21. Copy and paste as a new layer. Selections, invert and press delete. Deselect and move this layer below the frame layer.

Open Feather 3. Copy and paste as a new layer above the frame layer. Place along the right side of the frame.

Open your tube and resize as necessary. Copy and paste as a new layer. Flip horizontal and arrange to your liking.

Open the Heavenly Glow Swirls. Copy and paste as a new layer. Rotate slightly to the right.

Open Flower 4. Resize by 50%. Copy and paste as a new layer. Place to the bottom, slightly to the left. Duplicate, resize by 90%. Place to the upper left, inside the circle glow.

Open the Feathers and Stones. Resize by 60%. Copy and paste as a new layer. Place to the bottom left, to the left of the bottom green flower.

Open Ribbon 3. Resize by 85%. Flip horizontal, flip vertical. Copy and paste as a new layer. Place to the bottom.

Open Gift 1. Resize by 50%, flip horizontal. Copy and paste as a new layer. Place to the lower right.

Open the Pillows. Resize by 50%, flip horizontal. Copy and paste as a new layer. Place to the bottom right. Move the gift so it is above the pillows.

Open the Peacock. Copy and paste as a new layer. Place over the pillows.

Open Mask 2. Resize by 50%. Copy and paste as a new layer. Place to the lower left.

Open Brooch 3. Resize by 50%, flip horizontal. Copy and paste as a new layer. Place to the left side, slightly down from the left flower.

Add your name, copyright, and license number if using a PTU tube.

Apply a drop shadow of choice and then merge visible. Save as a PNG.

Thanks for checking out my tutorials.
Monday, March 25, 2013

Sweet Memories

This tutorial was written by me on March 25th, and is my own creation. Any resemblance to any other tutorial is purely coincidental and unintentional.

PSP Version used: PSP X5, but should work in other versions.

This tutorial assumes you have a good working knowledge of PSP.

Supplies:
 
Tube of choice. I am using the amazing work of VeryMany. You can purchase this tube here.
 
FTU kit Sweet Moments by Inzpired Creationz. You can find the kit here.
 
Template 187 by Toxic Desirez. You can find it here.
 
Font of choice. I am using Jellyka Delicious Cake.
--------------------
Open your template. Set the canvas size to 850 x 737. Resize all layers by 71%. Delete the Credits layer.
 
Open Doodle 1. Resize by 70%. Copy and paste as a new layer. Duplicate, flip horizontal, flip vertical and place to the upper left corner. On the original, place to the lower right corner. Merge these two layers together, move this layer to the bottom.
 
Merge together the Copy of Raster 8 layer & the Raster 8 layer. Select all, float, defloat. Open paper 3. Resize by 62%. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original layer.
 
Merge together the Copy of Raster 6 layer & the Raster 6 layer. Select all, float, defloat. Open paper 2. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original layer.
 
Merge together the Copy of Raster 7 layer & the Raster 7 layer. Select all, float, defloat. Open paper 1. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original layer.
 
Merge together the Copy of Raster 5 layer & the Raster 5 layer. Select all, float, defloat. Open paper 5. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original layer.
 
On the Copy of Raster 1 layer, select all, float, defloat. Open paper 1. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original layer.
 
On the circle paper layer, select all, float, defloat. Selections, modify, select selection borders, both sides & anti-alias checked, width 3. Add a new raster layer. Using two colors of your choice, set the foreground to gradient, angle 45, repeats 3. Floodfill the selection with your gradient. Add noise, uniform, 50, monochrome checked.
 
Open Doodle 2. Resize by 90%. Copy and paste as a new layer. Place to the bottom of your template.
 
Open Bow 2. Resize by 80%. Copy and paste as a new layer. Place along the top of your template.
 
Open Tree 2. Resize by 95%. Copy and paste as a new layer. Place along the left side of your frame.
 
Open the Scattered Petals. Resize by 85%. Copy and paste as a new layer. Place along the right side.
 
Open Flower 3. Resize by 50%. Copy and paste as a new layer. Place to the bottom left of the tree. Duplicate this layer.
 
Open the Notepad. Resize by 30%. Copy and paste as a new layer just above the original flower. Rotate slightly to the left and place to the bottom of the flower.
 
Open the Lantern. Resize by 40%. Copy and paste as a new layer. Place to the far right side of the template.
 
On the duplicate flower layer, flip horizontal and place slightly to the left of the lantern.
 
Open the Hummingbird. Resize by 40%. Copy and paste as a new layer. Place to the top of the lantern.
 
Open your tube and resize as necessary. Copy and paste as a new layer. Place to your liking.
 
Open the Basket. Resize by 40%. Copy and paste as a new layer. Place to the bottom right.
 
Open Cupcake 1. Resize by 40%. Copy and paste as a new layer. Place slightly to the right of the notepad.
 
Open Sparkles 1. Resize by 89%. Copy and paste as a new layer.
 
Add your name, copyright, & license info. Apply a drop shadow of choice, merge visible. Save as a PNG.
 
Thanks for checking out my tutorials.

Monday, March 11, 2013

Gold Glam


This tutorial was written by me on March 11th, 2013 and is my own creation. Any resemblance to any other tutorial is purely coincidental and unintentional.

PSP Version used: PSP X4, but should work in other versions.

This tutorial assumes you have a good working knowledge of PSP.

Supplies:

Tube of choice. I am using the sexy art of Barbara Jensen. You must purchase her art & obtain the proper licenseing to use her art. You may do so here

PTU kit Gold Shine by Inzpired Creationz. You can purchase this kit here

Template 100 by Millie's PSP Madness. You can find it here

Font of choice. I am using Simply Glamorous.

--------------------

Open your template. Set the canvas to 750 x 643. Resize all layers by 80%, all layers checked. Delete the credits and wordart layers.

On Raster 5, select all, float, defloat. Open paper 6. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original layer.

On Raster 4, select all, float, defloat. Open paper 11. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original layer.

On Raster 8, select all, float, defloat. Open paper 12. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original layer.

Delete Raster 9.

Merge together Copy of Raster 7 and Raster 7. Select all, float, defloat. Open paper 3. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original layer.

Open your tube. Copy and paste as a new layer. Place over the right square. Duplicate, flip horizontal, and place over the left square. When satisfied, merge these two layers together. On the square layer, select all, float, defloat. On the merged tube layer, selections, invert and press delete. Deselect. Now duplicate the tube layer, gaussian blur 3.00. Set the blend mode to Screen, opacity 65. On the original tubes layer, Shiift+L. Set the hue and saturation both to 0. Set the opacity for this layer to 50.

Merge together Copy of Raster 2 and Raster 2. Select all, float, defloat. Open paper 10. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original layer.

On Raster 3, select all, float, defloat. Open paper 1. Copy and paste as a new layer. Selections, invert and press delete. Deselect and delete the original layer.

Open your tube again, copy and paste as a new layer. Resize if necessary. Duplicate your tube and arrange the two tubes over the large rectangle layer. When satisfied with your arrangement, merge the two tube layers together.

On the large rectangle layer, select all, float, defloat. On the merged tubes layer, selections, invert and press delete. Deselect. Duplicate the tubes layer, gaussian blur with the same settings as before. Set the blend mode to Screen, opacity 65. On the original tube layer, Shift+L using the same settings as before.

Open Leaves 3. Resize by 60%. Copy and paste as a new layer. Place to the far left. Duplicate, flip horizontal and place to the far right.

Open the Bling Curtain. Resize by 79%. Copy and paste as a new layer. Place over the large rectangle layer, then on the large rectangle layer, select all, float, defloat. On the bling curtain layer, selections, invert and press delete.

Open Tulle 1. Resize by 55%. Copy and paste as a new layer. Place to the bottom left. Duplicate, flip horizontal and place to the lower right.

Open Ribbon 3. Resize by 93%, flip vertical. Copy and paste as a new layer. Place to the top of your template layers.

Open the Crown. Resize by 50%, flip horizontal. Copy and paste as a new layer. Place in the upper right corner.

Open the Lipstick and Polish. Resize by 45%. Copy and paste as a new layer. Place to the lower right corner.

Open Leaves 1. Rotate 90 counterclockwise. Resize by 50%. Copy and paste as a new layer. Place to the bottom left over the tulle. Duplicate, flip horizontal and place over the tulle on the right side.

Open the Key. Resize by 40%. Copy and paste as a new layer. Place to the left side of the large rectangle layer.

Open Bow 2. Resize by 40%. Copy and paste as a new layer. Place over the top right corner of the large rectangle. Duplicate, flip horizontal, and place over the top left corner of the large rectangle.

Move the key so that the key looks like it's hanging from the bow on the left. See my tag for reference.

Open Rose 2. Resize by 40%. Copy and paste as a new layer. Place over the  right black leaves at the bottom. Duplicate, flip horizontal and place over the left black leaves.

Open Scattered Bling 2. Resize by 88%. Copy and paste as a new layer. Place towards the top of your template layers.

Open your tube again. Copy and paste as a new layer, resize as necessary. Duplicate, gaussian blur using the same settings as before. Set the blend mode to Overlay. On the original tube layer, Shift+L using the same settings as before.

Open Sparkles 3. Resize by 90%. Copy and paste as a new layer and place to your liking.

Add your name, copyrights, and license info. Apply a drop shadow of choice and then merge visible. Save as a PNG.

Thanks for checking out my tutorials.


Friday, March 8, 2013

Spring Serenity Forum Set



This tutorial was written by me on March 8th, 2013 and is my own creation. Any resemblance to any other tutorial is purely coincidental and unintentional.

PSP Version used: PSP X4, but should work in other versions.

This tutorial assumes you have a good working knowledge of PSP.

Supplies:

Tube of choice. I am using the work of VeryMany, a PTU artist. You must purchase her work and obtain the proper licensing to use it. You may purchase her work here.

PTU kit Spring Serenity by Inzpired Creationz. You can purchase this kit here.

Font of choice. I am using Buffet Script.

Filters: AAA Frames Foto Frame

--------------------

Open a new blank image, 600 x 250.

Open paper 1. Copy and paste as a new layer onto your blank canvas. Arrange so you see the petals at the bottom.

Open the Falling Petals. Copy and paste as a new layer. Place to the far right. Duplicate, mirror, and place to the far left. Merge these two layers together.

Open the Bricks. Resize by 60%. Copy and paste as a new layer.

Open the Clouds. Resize by 80%. Copy and paste as a new layer.

Open Grass 1. Flip horizontal. Copy and paste as a new layer. Move slightly down.

Open the Flower Corner. Resize by 60%. Copy and paste as a new layer. Place to the lower left corner. Duplicate, flip horizontal, flip vertical and place to the upper right corner. Now merge these two layers together.

Open the Flower Doodles. Resize by 60%. Copy and paste as a new layer. Place to the far left side. Now duplicate twice and arrange over the entire canvas. Merge the three layers together.

Open the Lamp post. Copy and paste as a new layer. Place slightly to the right of center.

Open the Butterflies. Copy and paste as a new layer. Place to your liking.

Open Bow 2. Resize by 80%. Copy and paste as a new layer. Place to the top edge.

Open your tube and resize as necessary. Copy and paste as a new layer. Place slightly to the left of center.

Open the Pillows. Resize by 60%. Copy and paste as a new layer. Place to the lower right corner.

Apply a drop shadow of choice to your layers.

Window, duplicate and close the duplicate for now.

Merge all layers visible.

AAA Frames Foto Frame, 6, 0, 0, 1, 0, 0, 0, 75.

Add your name, copyright, and license info. Save as a PNG.

Now for the avatar.

On the duplicate, merge visible. Crop to the size of your choice. I usually make mine 150 x 150.

AAA Frames Foto Frame using the same settings as before. Add your name or initial, copyright, and license info. Apply a drop shadow of choice, if desired. Save as a PNG.

Thanks for checking out my tutorials.
Sunday, March 3, 2013

Nobody's Angel


This tutorial was written by me on March 3rd, 2013 and is my own creation. Any resemblance to any other tutorial is purely coincidental and unintentional.

PSP Version used: PSP X4, but should work in other versions.

This tutorial assumes you have a good working knowledge of PSP.

Supplies:

Tube of choice. I am using the awesome work of Elias Chatzoudis. I purchased this tube when he was with PSP Tubes Emporium. You can now purchase his tubes here.

PTU kit Nobody's Angel by Purple Kreationz. You can purchase this awesome kit here.

Template 16 by Kandi Kissez. You can find it here.

Mask 167 by Weescotslass Creations. You can find it here.

Font of choice. I am using I'm Fashionista!

Filters: Xero Porcelain

--------------------

Open your template & mask. Minimize your mask for now.

Resize your template to 600 x 471, all layers checked. Delete the credits, word art, & background layers.

Open paper 7. Copy & paste as a new layer. Apply your mask, merge group. Move this layer to the bottom.

Open the GLITTER. Resize by 75%. Copy & paste as a new layer. Place to the right side. Duplicate, mirror, & place to the left side. Merge these two layers together.

On the dotted borders layer, manual color correction. Set the source to #9b2191 & the target to #ffffff.

On the center bar frame, select all, float, defloat. Open paper 11. Copy & paste as a new layer. Selections, invert & press delete. Deselect & delete the original layer.

On the center purple bar, select all, float, defloat. Open paper 1. Copy & paste as a new layer. Selections, invert & press delete. Deselect & delete the original layer.

On the left arrow layer, manual color correction. Set the source to #000000 & the target to #ffffff. Repeat for the right arrow layer.

On the middle purple black layer, select all, float, defloat. Open paper 4. Copy & paste as a new layer. Selections, invert & press delete. Deselect & delete the original layer.

On the middle gradient block, select all, float, defloat. Add a new raster layer & floodfill with #f8b5d8. Deselect & delete the original layer. Repeat for the other two gradient blocks.

Merge the top & bottom purple blocks together. Select all, float, defloat. Open paper  5. Copy & paste as a new layer. Selections, invert & press delete. Deselect & delete the original layer.

Merge the top & bottom pink blocks together. Open your tube. Copy & paste as a new layer, resize if necessary. Place over the bottom left block. Duplicate, mirror, & arrange over the top right block. When you are satisfied with the placement, merge the two tube layers together.

On the merged block layer, select all, float, defloat. On the merged tubes layer, selections, invert & press delete. Deselect.

Xero porcelain. Change the blue to 0.

On the small purple blocks layer, select all, float, defloat. Open paper 11 again, copy & paste as a new layer. Selections, invert & press delete. Deselect & delete the original layer.

3D Effects, Inner Bevel using the following settings:


On the stars layer, manual color correction, set the source to #ffffff & the target to #d0448c.

Inner bevel using the same settings as before.

Open the TRAIL. Resize by 84%. Copy & paste as a new layer. Place over the top of the center bar. Duplicate & place over the bottom of the center bar. Merge these two layers together. See my tag for reference.

Open BOW2. Resize by 50%. Copy & paste as a new layer. Place over the top right corner of the bottom left frame. Duplicate, mirror, & place over the top right corner of the center frame.

Open your tube again. Copy & paste as a new layer, resize as necessary. Place over the middle frame.

Xero Porcelain using the same settings as before.

Open RIBBON1. Resize by 90%, mirror. Copy & paste as a new layer. Place to the bottom of your tube.

Open the RAZORCUPPY. Resize by 60%. Copy & paste as a new layer. Place to the lower right corner.

Open the LILLY. Resize by 50%. Copy & paste as a new layer. Place slightly to the left of the razorcuppy. Duplicate, mirror. Place to the upper left corner.

Open the COCKTAIL. Resize by 80%, mirror. Copy & paste as a new layer. Place to the lower left corner.

Add your name, copyrights, & license info. Apply a drop shadow of choice & merge visible. Save as a PNG.

Thanks for checking out my tutorials.

Grab My Blinkie

 photo LCblnk1_angelsdesignz.gif

Search

Followers

NetworkedBlogs