Keep an eye out for this tube at Ismael's store!

You can find this fabulous kit by Inzpired Creationz here.

This tutorial was written by me on August 30th, 2012 and is my own creation. Any resemblance to any other tutorial is purely coincidental and unintentional.

PSP Version used: PSP9, but should work in other versions.

This tutorial assumes you have a good working knowledge of PSP.

Supplies:

Tube of choice. I am using a soon-to-be-released tube from the amazing Arthur Crowe. Keep an eye out for this beauty in his store! 

PTU Emo Girl Red kit by Purple Kreationz. You can purchase it here. 

RB Mask 47 by Rosesblack. You can find it here. 

Font of choice. I am using Janda Silly Monkey.

--------------------

Open a blank transparent image, 600 x 600.

Open your mask and paper 13. Copy and paste your paper as a new layer onto your blank canvas. Merge group.

Open the splat. Copy and paste as a new layer. Move to the bottom. Duplicate, flip, & mirror. Merge down.

Open frame 3. Resize by 85%. Copy and paste as a new layer. With your magic wand click inside the frame. Selections, modify, expand by 10. Open paper 19. Copy and paste as a new layer. Selections, invert and press delete on your keyboard. Deselect. Move this layer below your frame layer.

Open the box from the desktop. Copy and paste as a new layer. Move this layer above your frame layer. Place to the bottom.

Open ribbon2. Copy and paste as a new layer. Place over the box. If not using the same tube, place under the tube towards the bottom. Use your raster deform tool to straighten the ribbon.

Open the beadedhearts. Copy and paste as a new layer. Place over the ribbon.

Open the lolli. Resize by 60%. Copy and paste as a new layer. Place in the upper left corner. Rotate slightly to the left.

Open lolli2. Repeat the steps above but rotate to the right. Place over the first lolli. See my tag for reference.

Ok now open your tube. Copy and paste as a new layer. Place so she is sitting on the box.

Open the ipod. Resize by 60%. Copy and paste as a new layer. Place just inside of her right foot at the bottom.

Open the milkshake. Resize by 80%. Copy and paste as a new layer. Place to the bottom right.

Open the lips. Resize by 50%. Copy and paste as a new layer. Place to the upper right side. Rotate slightly to the right.

Open the butterfly. Resize by 50%. Copy and paste as a new layer. Place to the bottom, slightly to the left of her left shoe. Rotate slightly to the left.

Open the cat. Resize by 50%. Copy and paste as a new layer. Place to the bottom left corner.

Open the cuppy. Resize by 50%. Copy and paste as a new layer. Place to the bottom right.

Add your name, copyright, and license info.

Apply a drop shadow of choice.

Merge visible and save as a PNG.

Thanks for checking out my tutorials.

This tutorial was written by me on August 30th, 2012 and is my own creation. Any resemblance to any other tutorial is purely coincidental and unintentional.

PSP Version used: PSP9, but should work in other versions.

This tutorial assumes you have a good working knowledge of PSP.

Supplies:

Tube of choice. I am using the work of Arthur Crowe. You can purchase it here. 

FTU kit Drama Queen by My Scrappy Life. This kit is an exclusive to The Creative Chicks forum. You must be a member of the forum to obtain this kit. You can join the forum here. 

Mask 364 by Weescotslass Creations. You can find it here. 

Font of choice. I am using Carpenter ICG.

--------------------

Open a blank canvas, 600 x 600.

Open Paper12 and your mask. Copy and paste your paper onto the blank canvas.

On your mask, set the canvas size to 650 x 650, background set to black.

Apply your mask to to paper layer, merge group.

Open Element29. Copy and paste as a new layer.

Open your tube. Copy and paste as a new layer. Resize if necessary and move slightly down.

Open Element35. Resize by 50%. Copy and paste as a new layer. Place to the bottom of your frame.

Open Element3. Resize by 40%. Copy and paste as a new layer. Turn slightly to the left and place to the bottom left of your frame.

Open Element15. Copy and paste as a new layer. Place to the right side of the frame.

Open Element5. Resize by 40%, mirror. Copy and paste as a new layer. Place to the lower right of your tag.

Open Element40. Resize by 25%. Copy and paste as a new layer. Rotate slightly to the left and place to the right of the wordart button.

Open Element24. Resize by 40%. Copy and paste as a new layer. Place to the right of  the sunglasses.

Open Element12. Resize by 30%. Copy and paste as a new layer. Place over the button. Rotate slightly to the left.

Open Element21. Resize by 50%. Copy and paste as a new layer. Place to the bottom of the button.

Open Element13. Resize by 60%. Copy adn paste as a new layer. Place over the green glitter doodle.

Open Element19. Resize by 40%. Copy and paste as a new layer. Place just above the flower.

Add your name, copyright, and license info.

Apply a drop shadow of choice and merge visible. Save as a PNG.

Thanks for checking out my tutorials.

This tutorial was written by me on August 29th, 2012 and is my own creation. 

Any resemblance to any other tutorial is purely coincidental and unintentional.

PSP Version used: PSP9, but should work in other versions.

This tutorial assumes you have a good working knowledge of PSP.

Supplies:

Tube of choice. I am using the work of Lia. http://linmida.com Lia is a FTU artist. You may obtain her tubes throught a copyright aware group such as DragonsLair Tubes. 

PTU Trick or Treat kit by Inzpired Creationz. http://inzpiredcreationz.blogspot.com You can purchase it here. 

Mask 81 by Weescotslass Creations. You can find it here. 

Font of choice. I am using Freeze!.

--------------------

Open Frame 4. Resize by 80%, all layers unchecked. Resize all layers by 83% and set the canvas to 600 x 514.

Open paper 2 and your mask, minimize your mask. Copy and paste your paper as a new layer onto your frame. Apply your mask, merge group. Move this layer to the bottom.

On your frame layer, use your magic wand and click inside the frame. Selections, modify, expand by 10. Add a new raster layer and floodfill with #aede65. Deselect and move this layer below your frame layer.

Artistic effects, halfton, round, 16. Screen angles 45, use as overlay checked, overlay, 23. Greyscale ticked, ink white, transparent checked.

Open your tube. Copy and paste as a new layer. Place to the right side of the green halftone layer. Duplicate and mirror. Merge down. Duplicate again, gaussian blur 3.00. Set the blend mode to soft light and colorize to 0, 0. On the original layer, set the blend mode to screen.

Open Tree 2. Resize by 70%. Copy and paste as a new layer above your frame. Place to the right side of your frame. Duplicate, mirror, and merge down.

Open Ribbon 3. Resize by 80%. Copy and paste as a new layer. Place to the bottom of the frame.

Open the Cotton Candy. Resize by 60%. Copy and paste as a new layer. Place to the bottom left. Use your raster deform tool to turn slightly to the left.

Open Alien 2. Resize by 60%. Copy and paste as a new layer. Place slightly to the right of the cotton candy.

Open the Lanterns. Resize by 80%. Copy and paste as a new layer. Place to the bottom of the ribbon.

Open House 1. Resize by 60%, mirror. Copy and paste as a new layer. Place to the bottom right.

Open Cupcake 2. Resize by 50%. Copy and paste as a new layer. Place to the bottom of the house.

Open your tube again. Copy and paste as a new layer and place so she sits in the middle of the frame. Duplicate, gaussian blur with the same settings as before. Set the blend mode to screen.

Open Spider 2. Resize by 25%. Copy and paste as a new layer. Place over the broom. Use your raster deform tool to turn the spider to the left.

Open Sparkles 3. Resize by 80%, flip. Copy and paste as a new layer.

Add your name, copyright, and license if using a PTU tube. Apply a drop shadow of choice.

Merge visible and save as a PNG.

Thanks for checking out my tutorials.

This tutorial was written by me on August 28th, 2012 and is my own creation. 

Any resemblance to any other tutorial is purely coincidental and unintentional.

PSP Version used: PSP9, but should work in other versions.

This tutorial assumes you have a good working knowledge of PSP.

Supplies:

Tube of choice. I am using the work of Barbara Jensen.  This tube is an exclusive for SATC. You can purchase it here.

PTU Farewell Summer kit by me. You can purchase it here. 

Square Template 5 by Tina's Magical Scrap World. You can find it here. 

Font of choice. I am using Stephanie Marie JF.

--------------------

Open your template. Resize all layers by 86%. Delete the following layers: Info, DottedCircle, Dotted2, Dotted1, Background.

Merge together the LeftHalf and RightHalf layers. Select all, float, defloat. Open PAPER6. Copy and paste as a new layer. Selections, invert and press delete on your keyboard. Deselect and delete the original layer.

Open the WIRE. Resize by 85%. Copy and paste as a new layer. Move this layer to the bottom.

On the Circle layer, select all, float, defloat. Open PAPER5. Copy and paste as a new layer. Selections, invert and press delete on your keyboard. Deselect and delete the original layer.

On the LeftSquare layer, select all, float, defloat. Open PAPER2. Copy and paste as a new layer. Selections, invert and press delete on your keyboard. Deselect and delete the original layer. Repeat for the right square layer.

Highlight the left square layer. Open your tube. Copy and paste as a new layer. Place to your liking. With your magic wand tool, click inside the LeftFrame. Selections, modify, expand by 3. On the tube layer, selections, invert and press delete on your keyboard. Deselect.

Duplicate your tube, gaussian blur 3.00. Set the blend mode to screen. On the original layer, set the blend mode to overlay. Repeat for the right square.

On the center square layer, select all, float, defloat. Open PAPER3. Copy and paste as a new layer. Selections, invert and press delete on your keyboard. Deselect and delete the original layer.

Copy and paste your tube again and place to your liking. With your magic wand, click inside the frame, selections, modify, expand by 3. On the tube layer, selections, invert and press delete. Deselect. Set the blend mode to screen. On the original tube layer, set the blend mode to luminance (L).

To all the frame layers, manual color correction. Set the source color to white and the target color to #4f305c. Add noise, gaussian, 100, monochrome checked.

Open FEATHER2. Resize by 60%. Copy and paste as a new layer. Move this layer to the top. Use your raster deform tool and rotate to the right so it is at an angle. See my tag for reference.

Duplicate and mirror, merge down.

Open RIBBON3. Copy and paste as a new layer. Place to the bottom.

Open BOW2. Resize by 50%. Copy and paste as a new layer. Place in the upper left corner of the left frame. Rotate slightly to the left. Duplicate, mirror, and place to the upper right corner of the right frame.

Open LEAVES1. Resize by 60%. Copy and paste as a new layer. Place to the right side of your tag. Duplicate, free rotate 90 to the right. Move over your ribbon. See my tag for reference.

Open the DRAGONFLIES. Resize by 60%. Copy and paste as a new layer. Place to the right side, just below your bow. Duplicate, mirror and place just under the bow on the left.

Open the BASKET. Resize by 65%. Copy and paste as a new layer. Place to the bottom left.

Open ROSE2. Resize by 15%. Copy and paste as a new layer. Place over the basket so it looks like it's sitting in the basket.

Open the MARTINI. Resize by 60%. Copy and paste as a new layer. Place to the bottom left.

Open PEARLS1. Copy and paste as a new layer. Move to the bottom.

Open the SHOE. Resize by 50%. Copy and paste as a new layer. Place to the bottom left.

Open CUPCAKE2. Resize by 50%. Copy and paste as a new layer. Move to the bottom right.

Apply a drop shadow of choice.

Hide your wire layer and then merge visible. Move your tag on your canvas so it is centered. Unhide the wire layer and merge visible again.

Add your name, copyright & license number. Save as a PNG.

Thanks for checking out my tutorials.

This tutorial was written by me on August 26th, 2012 and is my own creation. 

Any resemblance to any other tutorial is purely coincidental and unintentional.

PSP Version used: PSP9, but should work in other versions.

This tutorial assumes you have a good working knowledge of PSP.

Supplies:

Tube of choice. I am using the work of Jessica Doughterty. I bought this tube when she was with CILM. You can purchase her tubes here. 

PTU Trick or Treat kit by Sandy's Design. You can purchase it here. 

Font of choice. I am using Soul Reaver.

--------------------

Open a blank canvas, 600 x 250.

Open paper15. Copy and paste as a new layer.

Open border2. Copy and paste as a new layer. Move slightly up.

Open tombstone1. Resize by 50%. Copy and paste as a new layer. Move to the right side.

Open ribbon1. Resize by 59%. Copy and paste as a new layer. Place to the top, slightly to the right. See my tag for reference.

Open witch hat1. Resize by 40%, Mirror. Move to the bottom left of the tombstone.

Open fullmoon1. Resize by 30%. Copy and paste as a new layer. Place to the upper left corner.

Open cauldron1. Resize by 60%. Copy and paste as a new layer. Move down and slightly to the right.

Open witch's broom2. Resize by 50%. Copy and paste as a new layer. Place to the right of the tombstone.

Open candy licious3. Resize by 35%. Copy and paste as a new layer. Move to the bottom and slightly to the left. 

Open candy licious1. Resize by 35%. Copy and paste as a new layer. Place to the bottom right of your witches hat.

Open candy licious2. Resize by 35%. Copy and paste as a new layer. Place to the bottom left.

Open your tube. Copy and paste as a new layer. Place to the left side. Arrange any candies so they appear peaking out from behind your tube. See my tag for reference.

Duplicate your tube, gaussian blur 3.00. Set the blend mode to overlay and colorize the original tube to 0, 0. 

Now for the frame. Save the following image:

Open this image and minimize. In your materials palette, set your foreground to the pattern you just saved, angle 45, scale 100.

Back to your tag. Select all, modify, contract by 3. Add a new raster layer and floodfill with your pattern. Do not deselect.

Selections, modify, expand by 2. Add a new raster layer and floodfill with white. Deselect. Move this layer below the pattern frame layer. 

On the pattern frame layer, add noise, gaussian, 100, monochrome checked. Merge the two frame layers together.

Add your name, copyrights, and license info.

Apply a drop shadow of choice. 

Merge visible and save as a PNG.

Thanks for checking out my tutorials.

This tutorial was written by me on August 25th, 2012 and is my own creation. 

Any resemblance to any other tutorial is purely coincidental and unintentional.

PSP Version used: PSP9, but should work in other versions.

This tutorial assumes you have a good working knowledge of PSP.

Supplies:

PTU Early Fall kit by Inzpired Creationz. You can purchase it here. 

Font of choice. I am using Always Fat.

--------------------

I wanted to see if I could make a cluster tag and here is what I came up with. This is a very quick tutorial & tag. Hope you like it.

Open a blank canvas, 600 x 600 px.

Open the Window Frame. Resize by 50%. Copy and paste as a new layer. Place to the middle left.

Open Lantern 1. Resize by 80%. Copy and paste as a new layer. Place to the right side of the window.

Open Leaves 1. Copy and paste as a new layer. Place to the bottom of the lantern. Duplicate and with your raster deform tool, turn slightly to the left.

Open Flowers 1. Resize by 80%, flip. Copy and paste as a new layer. Place over your leaves.

Open Ribbon 2. Resize by 80%. Copy and paste as a new layer. Place over the bottom of the leaves.

Open Flower 3. Resize by 50%. Copy and paste as a new layer. Place to the bottom left of your window frame.

Open Sparkles 3. Resize by 90%. Copy and paste as a new layer. Place to your liking.

Add your name and a drop shadow of choice, merge visible.

Add your copyright. Since we are not using a tube, you must credit the scrap designer.

Save as a PNG.

Thanks for checking out my tutorials.

This tutorial was written by me on August 24th, 2012 and is my own creation. 

Any resemblance to any other tutorial is purely coincidental and unintentional.

PSP Version used: PSP9, but should work in other versions.

This tutorial assumes you have a good working knowledge of PSP.

Supplies:

Tube of choice. I am using the work of Keith Garvey, a PTU artist. You must purchase his work and obtain the proper licensing. You can do so here. 

PTU Summer Fantasy kit by Mistylynn's Creationx. You can purchase it here. 

Font of choice. I am using KG Call Me Maybe.

Filters: 

VM Extravaganza Transmission

--------------------

Open a blank canvas, 600 x 250.

Set your foreground to #adadad and your background to #000000. Use a linear gradient, angle 0, repeats 0. Floodfill your canvas with this gradient.

VM Extravaganza Transmission, 10, 0, 8.

Open the LIGHT RAY. Copy and paste as a new layer. Set the blend mode to soft light.

Open your tube and duplicate 5 times. Arrange over your canvas to your liking. Merge your tubes together. Duplicate, gaussian blur, 3.00. Set the blend mode to screen, 60. On the original set your blend mode to luminance (L), 60.

Open RIBBON03. Rotate clockwise 90. Copy and paste as a new layer. Place to the bottom of your canvas.

Open the HANDBAG. Resize by 30%. Copy and paste as a new layer. Place to the bottom right. Move slightly in.

Open SMROSE01. Copy and paste as a new layer. Place to the lower right corner. Duplicate and place this one in the upper left corner.

Open BUTTERFLY01. Resize by 30%. Copy and paste as a new layer. Place to the right of your rose that is in the upper left corner. Use your raster deform tool and rotate slightly to the left.

Open the POLISH. Resize by 30%. Copy and paste as a new layer. Place to the right side of the handbag.

Open the LIPSTICK. Resize by 30%. Copy and paste as a new layer. Place to the right side of the polish.

Open the BOOTS. Resize by 40%. Copy and paste as a new layer. Place to the left side.

Open LIPS2, mirror. Resize by 30%. Copy and paste as a new layer. Place in the upper right corner.

Open the HEART BOTTLE. Resize by 25%. Copy and paste as a new layer. Place to the bottom & slightly to the right. See my tag for reference.

Open your tube again. Copy and paste as a new layer. Place to the right side of the heart bottle. See my tag for reference.

Duplicate, gaussian blur with the same settings as before. Set the blend mode to overlay. On the original tube layer, colorize to 0, 0.

Open the SPARKLE. Copy and paste as a new layer. Set the opacity for this layer to 80.

Add a new raster layer. Select all, modify, contract by 3, invert. Create a new gradient using #ee1a63 and #ffb3c0. Set the angle to 45, repeats 3, style linear. Floodfill your selection with the gradient. Do not deselect.

Selections, modify, contract by 2. Selections, invert. Add a new raster layer and floodfill this layer with #ffffff. Deselect and move this layer below the gradient frame. 

On the gradient frame layer, add noise, uniform, 75, monochrome checked. Now merge this layer down.

Add your name and a drop shadow of choice.

Merge visible. Add your copyright & license info and save as a PNG.

Thanks for checking out my tutorials.

This tutorial was written by me on August 23rd, 2012 and is my own creation. 

Any resemblance to any other tutorial is purely coincidental and unintentional.

PSP Version used: PSP9, but should work in other versions.

This tutorial assumes you have a good working knowledge of PSP.

Supplies:

Tube of choice. I am using the work of Roman Zaric, a PTU artist. You must purchase his work and obtain the proper licensing. You can do so here. 

FTU Rockstar kit by Alika's Scraps. You can download it here. 

Font of choice. I am using Over the Rainbow.

--------------------

Open as17. Image, canvas size, 600 x 600.

Activate your magic wand tool and click inside the frame. Selections, modify, expand by 5. Open as_paper10. Copy and paste as a new layer. Selections, invert and press delete on your keyboard. Deselect. Move this layer below your frame layer.

Open as15. Copy and paste as a new layer. Place to the upper right corner. Duplicate, mirror, merge down. Duplicate again, flip, and merge down. Move this layer to the bottom.

Open as26. Copy and paste as a new layer. Repeat the steps that we did for the splatter. Move this layer above your paper layer.

Open as32. Resize by 60%, mirror. Copy and paste as a new layer. Move this layer above the frame layer and place to the upper left side of the frame.

Open as46. Resize by 60%. Copy and paste as a new layer. Place to the upper right side of the frame. Duplicate, mirror, and move just below the first note. See my tag for reference.

Open as12. Resize by 50%. Image, rotate clockwise 90. Copy and paste as a new layer. Place to the bottom of your canvas.

Open as05. Copy and paste as a new layer. Place to the bottom right corner of you canvas.

Open your tube and resize if necessary. Duplicate, gaussian blur 3.00, set the blend mode to screen, 80. On the original tube layer, colorize, 0, 0. Adjust, Brightness and contrast, gamma correction. Set all the sliders to 0.58.

Open as44. Copy and paste as a new layer. Place to the lower left of your frame.

Open as29. Resize by 80%, flip. Copy and paste as a new layer. Place to the lower right. Duplicate and mirror. Line up so it appears as part of the original ribbon, merge down. See my tag for reference.

Open as07. Resize by 90%. Copy and paste as a new layer. Place over the ribbon we just added. Straighten it with your raster deform tool. See my tag for reference.

Open as25. Resize by 60%. Copy and paste as a new layer. Place to the bottom right corner.

Open as24. Resize by 40%. Copy and paste as a new layer. Place to the bottom of the martini glass.

Open as04. Resize by 60%. Copy and paste as a new layer. Place to the left side of the star.

Open as35. Copy and paste as a new layer.

Add a drop shadow of choice.

Add your name, copyright info, and license number. Merge visible and save as a PNG.

Thanks for checking out my tutorials.

This tutorial was written by me on August 23rd, 2012 and is my own creation. 

Any resemblance to any other tutorial is purely coincidental and unintentional.

PSP Version used: PSP9, but should work in other versions.

This tutorial assumes you have a good working knowledge of PSP.

Supplies:

Tube of choice (one that has a closeup works best). I am using the work of Elias Chatzoudis. You must purchase his work and obtain the proper licensing. You may do so here. 

PTU kit Steampunk Emo by Inzpired Creationz. You can purchase it here. 

Template 222 by Denz Designz. You can download it here. 

Texture 15 by VixPSP. You can download it here. 

Mask 206 by Gems Taggin' Scraps. You can download it here. 

Font of choice. I am using LHF Stanford Script.

-------------------

Open your template and mask. Minimize your mask.

On your template, delete the following layers: DD - delete, dotted circle outline, both small circle outlines, background pattern, and raster 1.

Resize all layers by 92%.

Set your foreground to #ea66a2 and your background to #ffffff. Create a gradient with these two colors, angle 0, repeats 5, style radial. Add a new raster layer and move this layer to the bottom. Apply your mask, merge group.

Open Stars 2. Resize by 90%. Copy and paste as a new layer above the mask layer.

On the 2 x circles layer, select all, float, defloat. Open paper 5. Copy and paste as a new layer. Selections, invert and press delete on your keyboard. Deselect and delete the original layer.

On the strip 2 layer, select all, float, defloat. Open paper 12. Copy and paste as a new layer. Selections, invert and press delete on your keyboard. Deselect and delete the original layer.

On the strip 1 layer, select all, float, defloat. Open paper 10. Copy and paste as a new layer. Selections, invert and press delete on your keyboard. Deselect and delete the original layer.

On the blue strip 2, select all, float, defloat. Open paper 7. Copy and paste as a new layer. Selections, invert and press delete on your keyboard. Deselect and delete the original layer.

On the blue strip 1 layer, select all, float, defloat. Open paper 1. Copy and paste as a new layer. Selections, invert and press delete on your keyboard. Deselect and delete the original layer.

On the large back 1 layer, manual color correction, source set to #7ca4c5, target set to #000000. Repeat for the small frame back layers. Merge the two small frame back layers, as well as the two small frame layers.

Open your texture, colorize to 0, 0. Copy and paste as a new layer above your large back 1 layer. On the large frame layer, use your magic wand and click inside the frame. Selections, modify, expand by 5. On the texture layer, selections invert and press delete on your keyboard. Deselect. Repeat for the small merged frame back layer.

On the large texture layer, open your full-size tube. Copy and paste as a new layer. Move to the left side of this layer. Duplicate and place to the right side. Merge down. With your magic wand, click inside the frame again. Modify, expand by 5. On the merged tubes, selections, invert and press delete on your keyboard. Deselect. 

Duplicate, gaussian blur 3.00, set the blend mode to screen, 50. On the original set the blend mode to luminance (L), 50.

Using your closeup tube, repeat the above, placing a single closeup in each of the small frames.

Open Lolli 2. Resize by 50%. Copy and paste as a new layer. Move this layer to the top. Place in the lower right corner. Using your raster deform tool, rotate slightly to the left.

Open Lolli 3. Repeat the above for the lolli, except rotate slightly to the right. Place slightly to the right of lolli 2. See my tag for reference.

Open Cupcake 3. Resize by 40%. Copy and paste as a new layer. Place to the bottom of the lolli's.

Open Ribbon 1. Resize by 80%. Copy and paste as a new layer. Place to the bottom left of your tag.

Open Butterfly 1. Resize by 60%. Copy and paste as a new layer. Place to the upper left side of your tag. With your raster deform tool, rotate slightly to the left. 

Open Bow 1. Resize by 40%. Copy and paste as a new layer. Place to the top right corner of the large frame. Duplicate and place on the top left corner of the small bottom frame. See my tag for reference.

Open Heart 3. Resize by 40%. Copy and paste as a new layer. Place  just on the right tip of the butterfly. See my tag for reference.

Open Stars 3. Resize by 40%. Copy and paste as a new layer. Place to the bottom left.

On the wordart back 2 layer, manual color correction. Set the target to #000000. On the wordart layer, set the target to #99175f. Now merge all the wordart layers together.

Copy and paste your full-size tube again. 

Open Lips 3. Resize by 25%, mirror. Copy and paste as a new layer. Place in the upper right corner, slightly in. See my tag for reference.

Open the cat. Resize by 50%, mirror. Copy and paste as a new layer. Place to the left of the wordart.

Open Emo Bear 2. Resize by 40%. Copy and paste as a new layer. Place to the right of your wordart.

Open Sparkles 1. Resize by 87%. Copy and paste as a new layer. Duplicate.

Add your name and a drop shadow of choice.

Add your copyright, license info, and merge visible. Save as a PNG.

Thanks for checking out my tutorials.

This tutorial was written by me on August 20th, 2012 and is my own creation. 

Any resemblance to any other tutorial is purely coincidental and unintentional.

PSP Version used: PSP9, but should work in other versions.

This tutorial assumes you have a good working knowledge of PSP.

Supplies:

Tube of choice. I am using the stunning work of Roman Zaric. You must purchase his work and obtain the proper licensing. You may do so here. 

PTU kit My Wedding Day by Purple Kreationz.  You can purchase this kit @ Scrap-A-Licious. 

Template 182 by Toxic Desirez. You can download it from her blog. 

RB Mask 60 by Rosesblack. You can download it from her blog. 

Font of choice. I am using Simply Glamorous.

Filters:

Penta.com Color Dot

Xero Porcelain, Fritillary

--------------------

Open your template and mask. Minimize your mask.

Set the canvas size for the template to 800 x 694. Now resize all layers by 75%. Delete the Credits layer & the Stars layer.

Click on the background layer. Set your foreground to #e64e96 and your background to #ffffff. Click on your gradients tab and select the foreground-background gradient, angle 45, repeats 5, style radial. Floodfill the background layer with the new gradient. Apply your mask, merge group. 

Add noise, uniform, 75, monochrome checked.

Merge the Bottom Grey Square layer and the Top Grey Square layer together. Select all, float, defloat. Open paper 17. Copy and paste as a new layer. Selections, invert and press delete on your keyboard. Deselect and delete the original layer.

Merge the Bottom Pink Rectangle layer and Top Pink Rectangle layer together. Select all, float, defloat. Open paper 11. Copy and paste as a new layer. Selections, invert and press delete on your keyboard. Deselect and delete the original layer.

Merge the Bottom Blue Square layer and Top Blue Square layer together. Select all, float, defloat. Open paper 10. Copy and paste as a new layer. Selections, invert and press delete on your keyboard. Deselect and delete the original layer.

On the Black Thin Rectangle layer, manual color correction. Set the source to #000000 and the target to #d80c6c.

Xero Fritillary, 5, 100, 100, 125.

On the Circle layer, select all, float, defloat. Open paper 16. Copy and paste as a new layer. Selections, invert and press delete on your keyboard. Deselect and delete the original layer.

On the Round Rectangle layer, select all, float, defloat. Add a new raster layer.

Create a new gradient. Set your foreground to #eb85b5 and your background to #ffffff, angle 169, repeats 1, style linear. Floodfill your selection with the new gradient. Deselect and delete the original layer

Penta.com Color Dot, 155, 10, 255, 255, 255.

Select all, float, defloat. Selections, modify, set selection borders, both sides checked, 3, anti-alias checked. Add a new raster layer and floodfill with #ffffff. Deselect. Add noise with the same settings as before.

Open your tube. Copy and paste as a new layer. Move this layer below the frame layer. Duplicate your tube 3 times, arranging them to your liking inside the frame. When you are satisfied, merge the tubes together. 

With your magic wand tool, select inside your frame. Selections, modify, expand by 3. On the merged tubes layer, selections, invert and press delete on your keyboard. Deselect. Set the blend mode to screen. On the original tubes layer, set the blend mode to overlay.

Open Ribbon 1. Resize by 90%. Copy and paste as a new layer. Move this layer to the top layer.

Open your tube again. Resize if necessary. Copy and paste as a new layer.

Xero Porcelain, 50, 128, 145, 0, 0, 0.

Open the Present. Resize by 50%. Copy and paste as a new layer. Place to the bottom right of your canvas.

Open the Tiara. Resize by 50%. Copy and paste as a new layer. Place to the bottom of the present, slightly to the left.

Open the Cufflinks. Resize by 80%. Copy and paste as a new layer. Place in front of the tiara.

Open the Puppy. Resize by 50%. Copy and paste as a new layer. Place to the left of the tiara.

Open the Bouquet. Resize by 50%%. Copy and paste as a new layer. Place in the upper right corner. With your raster deform tool, rotate slightly to the right. See my tag for reference.

Open the Cake. Resize by 60%. Copy and paste as a new layer. Place to the bottom left of your canvas.

Open the Cupcake. Resize by 50%. Copy and paste as a new layer. Place slightly down and to the right of the cake. See my tag for reference.

Open the Flute. Resize by 60%. Copy and paste as a new layer. Place to the left of your cupcake.

Open the Ring. Resize by 50%. Copy and paste as a new layer. Place in the upper left corner of your tag. See my tag for reference.

Open Sparkles2. Copy and paste as a new layer.

Open the Sparkles. Resize by 80%. Copy and paste as a new layer. Gaussian blur, 1.00. Duplicate.

Add a drop shadow of choice. I used 2, 2, 20, 3.00, black.

Add your name, copyright, and license info. Merge visible and save as a PNG.

Thanks for checking out my tutorials.

This tutorial was written by me on August 19th, 2012 and is my own creation. 

Any resemblance to any other tutorial is purely coincidental and unintentional.

PSP Version used: PSP9, but should work in other versions.

This tutorial assumes you have a good working knowledge of PSP.

Supplies:

Tube of choice. I am using the work of Elias Chatzoudis. I bought this tube when he was with PSP Tubes Emporium, which is now closed. You must purchase his work and obtain the proper licensing. You may do so here. 

PTU kit Sweet Grunge by Inzpired Creationz. You can purchase this kit @ SATC. 

Mask 198 by Insatiable Dreams. You can download it here. 

Font of choice. I am using Black Boys On Mopeds.

--------------------

Open Frame 2. Resize by 80%, all layers unchecked. Resize again, 83%, all layers checked.

With your magic wand tool, click inside the frame till the entire inside is selected. Selections, modify, expand by 10. Open paper 3. Copy and paste as a new layer. Selections, invert and press delete on your keyboard. Deselect. Move this layer below your frame layer.

Open your tube or a closeup. Copy and paste as a new layer above the paper layer. On the paper layer, select all, float, defloat. On the tube closeup layer, selections, invert and press delete on your keyboard. Deselect.

Duplicate your tube closeup. Gaussian blur, 3.00. Set the blend mode to luminance. On the original tube layer, hue and saturation, colorize to 0,0. Merge the two closeup layers together. Set the blend mode for the merged layer to luminance (L), opacity 88.

Open paper 1 and your mask. Minimize your mask. Copy and paste paper 1 as a new layer. Move this layer to the bottom. Apply your mask, merge group.

Open Butterfly 1. Resize by 40%. Copy and paste as a new layer above your frame layer. Place on the upper left side of your frame.

Open Bow 2. Resize by 30%. Copy and paste as a new layer. Place at the top center of the frame.

Open Ribbon 2. Resize by 87%, mirror. Copy and paste as a new layer. Place to the bottom of your frame.

Open the Cross. Copy and paste as a new layer. Place to the right of the frame.

Open Star 1. Resize by 30%. Copy and paste as a new layer. Place to the bottom right of your cross. With your raster deform tool, rotate slightly to the right. See my tag for reference.

Duplicate your star, mirror. move slightly down. Use your raster deform tool and turn slightly to the left. See my tag for reference.

Open Smear 2. Resize by 88%. Copy and paste as a new layer. Place to the bottom of your frame. Move this layer below the duplicate star layer.

Open Wordart 1. Copy and paste as a new layer. Place over top the smear layer.

Open Lips 1. Resize by 30%, mirror. Copy and paste as a new layer. Place to the middle left of your frame. See my tag for reference.

Open Cupcake 1. Resize by 40%. Copy and paste as a new layer. Place to the bottom left of your frame. 

Add your name and place over the bow. Move this layer above the duplicate star layer.

Open Sparkles 2. Resize by 89%. Copy and paste as a new layer.

Open your full size tube. Copy and paste as a new layer. Resize if necessary and place to the top of the wordart. Duplicate your tube, gaussian blur with the same settings as before. Set the blend mode to overlay. On the original tube layer, colorize with the same settings as before.

Open Bracelet 1. Resize by 30%. Copy and paste as a new layer. Place to the bottom right of your tag. See mine for reference.

Open Sparkles 1. Resize by 91%. Copy and paste as a new layer. Place to your liking.

Add a drop shadow of choice, copyright, and license info. Merge visible and save as a PNG.

Thanks for checking out my tutorials.

This tutorial was written by me on August 17th, 2012 and is my own creation. Any resemblance to any other tutorial is purely coincidental and unintentional.

PSP Version used: PSP9, but should work in other versions.

This tutorial assumes you have a good working knowledge of PSP.

Supplies:

Tube of choice. I am using the work of Zlata M. You can find this tube exclusively at The PSP Project. You must purchase her work and obtain the proper licensing. You can do so here. 

PTU kit Smexy EMOstyle by Alika's Scraps. You can purchase the kit @ Scrap-A-Licious. 

TagTemplate 410 by Divine Intentionz. You can find it on her blog here. 

BigMask019 by VixPSP. You can find it on her blog here. 

Font of choice. I am using Inspiration.

--------------------

Open your template & mask. Minimize your mask.

On the template, set the canvas size to 800 x 516. Resize all layers by 75%. Now set the canvas size to 600 x 500.

Delete the following layers: credits, stars, and background layers.

Open paper 5. Copy and paste as a new layer. Move to the bottom. Apply your mask, merge group.

Open as72. Resize by 60%. Copy and paste as a new layer. Move to the top right. Duplicate and mirror, merge down. Now duplicate again and move this layer to the bottom of your canvas so that the bottom peeks out. Now Merge this layer down.

Open as23. Resize by 87%. Copy and paste as a new layer. Place to the right and to your liking. Duplicate, mirror, and flip. Merge down.

Merge the rectangle2 and rectangle1 layers together. Select all, float, defloat. Open as_paper02. Copy and paste as a new layer. Selections, invert and press delete on your keyboard. Deselect and delete the original layer.

Merge the round edge rec 2 and rounded edge rec layers. Select all, float, defloat. Open as_paper12. Copy and paste as a new layer. Selections, invert and press delete on your keyboard. Deselect and delete the original layer.

Open as56. Resize by 50%, sharpen. Copy and paste as a new layer. Place over the round edge rec layer in the upper left corner of your tag. Duplicate and place to the right of the original. See my tag for reference.

On your thin rectangle layer, manual color correction. Set the source color to #fdaddc and the target color to #000000.

On the frame back layer, select all, float, defloat. Add a new raster layer. In the materials palette, set the foreground to #8ad8ec and the background set to #ffffff. Create a gradient with these colors, angle 51, repeats 3, linear. Floodfill the new layer with this gradient. Deselect and delete the original layer.

Open your tube. Copy and paste as a new layer. Move your tube inside your middle frame. With your magic wand tool, click inside the middle frame. Selections, modify, expand by 5. On your tube layer, selections, invert and press delete on your keyboard. Deselect. Repeat for the other two frames.

Merge your tube layers together. Duplicate, gaussian blur, 3.00. Set the blend mode to screen, opacity 60. On the original tubes layer, set the blend mode to luminance (L), opacity 60.

On the frame layer, manual color correction. Set the source to #ffffff and your target to #000000.

Open as27. Resize by 40%. Copy and paste as a new layer. Place over the upper right corner of the middle frame. Duplicate and place this one over the lower left corner of the middle frame. Merge down.

Open as50. Resize by 45%. Copy and paste as a new layer. Place in the lower right corner of your tag.

Open your tube again. Resize if necessary. Copy and paste as a new layer. Place to your liking. Duplicate, gaussian blur with the same settings as before. Set the blend mode to screen. On the original layer, hue and saturation, colorize to 0, 0.

Open as79. Resize by 65%. Copy and paste as a new layer. Place to the bottom of your tube.

Open as64. Resize by 50%. Copy and paste as a new layer. Place in the upper left corner. With your raster deform tool, rotate slightly to the left. See my tag for reference.

Open as83. Resize by 80%. Copy and paste as a new layer. Place to the lower left corner.

Open as17. Resize by 40%. Place to the left side of the briefcase.

Open as78. Resize by 30%. Copy and paste as a new layer. Place in the upper right corner of frame 3.

Open as26. Resize by 40%. Rotate left 80 degrees.

Open as60. Resize by 50%. Copy and paste as a new layer. Place on the lower left side of the card & key. With your raster deform tool turn slightly to the left. 

Ope as85. Resize by 50%, mirror. Copy and paste as a new layer. Place to the bottom right of your tag. 

Open as01. Resize by 60%. Copy and paste as a new layer. Place to the lower right of your tube.

Add your name, copyright, and license info. Add a drop shadow of choice. Merge visible and save as a PNG.

Thanks for checking out my tutorials.